Coding Start/Stop button
#1
AudiWorld Senior Member
Thread Starter
Coding Start/Stop button
I found this post about having the Start/Stop button remember the last settings and inverting the button LED status (so when it's disable, LED is off). Anyone tried it?
Stop Start button Settings
[09 – Cent. Elect.]
[Security Access – 16]
Enter code given, 20113, [Do It!]
[Adaption – 10]
Channel 34 [Read]
Read Default value
Add 32 for ‘remember last setting’
Add 64 to Reverse the LED status, so light = Stop Start Active (Default is light = Stop Start Off)
Subtract 4 to ‘default to Off’
So add 60 is the best option for me.
so add 60 to turn it off each engine start and invert LED in the switch (LED off with SS off, LED on with SS on)
Stop Start button Settings
[09 – Cent. Elect.]
[Security Access – 16]
Enter code given, 20113, [Do It!]
[Adaption – 10]
Channel 34 [Read]
Read Default value
Add 32 for ‘remember last setting’
Add 64 to Reverse the LED status, so light = Stop Start Active (Default is light = Stop Start Off)
Subtract 4 to ‘default to Off’
So add 60 is the best option for me.
so add 60 to turn it off each engine start and invert LED in the switch (LED off with SS off, LED on with SS on)
#2
Permanent S Mode Member
I found this post about having the Start/Stop button remember the last settings and inverting the button LED status (so when it's disable, LED is off). Anyone tried it?
Stop Start button Settings
[09 – Cent. Elect.]
[Security Access – 16]
Enter code given, 20113, [Do It!]
[Adaption – 10]
Channel 34 [Read]
Read Default value
Add 32 for ‘remember last setting’
Add 64 to Reverse the LED status, so light = Stop Start Active (Default is light = Stop Start Off)
Subtract 4 to ‘default to Off’
So add 60 is the best option for me.
so add 60 to turn it off each engine start and invert LED in the switch (LED off with SS off, LED on with SS on)
Stop Start button Settings
[09 – Cent. Elect.]
[Security Access – 16]
Enter code given, 20113, [Do It!]
[Adaption – 10]
Channel 34 [Read]
Read Default value
Add 32 for ‘remember last setting’
Add 64 to Reverse the LED status, so light = Stop Start Active (Default is light = Stop Start Off)
Subtract 4 to ‘default to Off’
So add 60 is the best option for me.
so add 60 to turn it off each engine start and invert LED in the switch (LED off with SS off, LED on with SS on)
Edit: I tried but don't know what to do with adaptation 10, channel 34. Can't find that with OBD-11, these instructions might be for a different tool.
Last edited by MH62; 04-13-2019 at 09:04 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Yoshimura
Audi A5 / S5 / RS5 Coupe & Cabrio (B9)
7
07-14-2019 06:48 PM
seinfieldbutsad
A4 (B8 Platform) Discussion
7
05-18-2019 05:57 PM
Maguila
A4 (B8 Platform) Discussion
0
04-07-2019 04:29 AM