Spacers for 20" factory millled
#1
AudiWorld Junior Member
Thread Starter
Join Date: Sep 2018
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Spacers for 20" factory millled
Mike panning at ECS tuning was very helpful in specing and shipping me 10mm fronts and 15mm rear spacers that worked out well.
I went with that setup as I didnt want too much poke and I'm happy with the result. First impression is that the car drives the same.
Will try to upload before and after pics as soon as I figure how to decrease file size/resolution.
I went with that setup as I didnt want too much poke and I'm happy with the result. First impression is that the car drives the same.
Will try to upload before and after pics as soon as I figure how to decrease file size/resolution.
#4
AudiWorld Senior Member
Damn, that black car has a 15mm spacer and its still that far in? Not saying it needs to be flush, your personal tastes are what matter, but wow what a crazy factory inset!
#6
Important to keep in mind the Coupe's fitment is slightly different from the Sportback, with the Coupe being 20x9 ET26 and the SB 20x9 ET22. This is true of both the "flag wheel" (like mine below) and the 5-spoke shown in both of the previous posts. So obviously that has an impact on fitment after spacers.
This is my SB with ET22 and 10/12 spacers (I think. Maybe 12/15 ... will verify). I also have the ET26 version of the 5-spoke, but haven't test fit them (with or without spacers).
This is my SB with ET22 and 10/12 spacers (I think. Maybe 12/15 ... will verify). I also have the ET26 version of the 5-spoke, but haven't test fit them (with or without spacers).
Thread
Thread Starter
Forum
Replies
Last Post
ernestolopez
A4 (B8 Platform) Discussion
4
05-04-2011 04:15 AM
pearl2k
S4 / RS4 (B5 Platform) Discussion
3
06-06-2003 08:07 AM
White LighTTning
TT (Mk1) Discussion
1
09-23-2002 01:49 AM