After changing LCD in cluster Allroad won't start... HELP...Please!
#1
Audiworld Junior Member
Thread Starter
Join Date: May 2013
Location: Austin, TX
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
After changing LCD in cluster Allroad won't start... HELP...Please!
Hi All,
Any help would be appreciated.
I installed a new LCD in my cluster two days ago and after reinstalling I received the flashing "Key" light. I have read that it might have something to do with my immobilizer? Nothing was wrong with the car at all prior to changing the LCD, so I thought. I have a 2003 AR if that helps. So after a minute, I realized the car was not going to start, but when I left the cluster plugged in the speedo kept pulsing lightly. A friend came by and connected the vag and the photos below show whatever info was displayed
Thanks [headbang]
[IMG][/IMG]
[IMG][/IMG]
Any help would be appreciated.
I installed a new LCD in my cluster two days ago and after reinstalling I received the flashing "Key" light. I have read that it might have something to do with my immobilizer? Nothing was wrong with the car at all prior to changing the LCD, so I thought. I have a 2003 AR if that helps. So after a minute, I realized the car was not going to start, but when I left the cluster plugged in the speedo kept pulsing lightly. A friend came by and connected the vag and the photos below show whatever info was displayed
Thanks [headbang]
[IMG][/IMG]
[IMG][/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
nmitch
A6 / S6 (C5 Platform) Discussion
17
12-17-2012 01:30 PM
LookUDeadinTheEye
S4 / RS4 (B5 Platform) Discussion
5
02-12-2007 12:54 PM
titan101
S4 / RS4 (B5 Platform) Discussion
3
07-06-2003 08:53 AM