|
New video about the 01E Manual Transmission
Here is my video about the 01E manual transmission. I have it for some time, but just find the time to publish it.
If you like it, give me a thumps up, if not, leave comments with how I can improve it. Education should be free... Thanks. https://www.youtube.com/watch?v=sF4L...ature=youtu.be |
Wow, nice work. Thanks for posting.
|
Love it. Honestly, manual gear boxes are always worth a look to me.
After pulling the torsion housing off the tail section and removing, is the center section (with main shafts and gears) simply held to the pinion section by the bolts on the outside of the case? Is there anything else that must be pulled before the pinion and center section can be pulled apart? |
Originally Posted by Jesse_Boyer
(Post 24775276)
Love it. Honestly, manual gear boxes are always worth a look to me.
After pulling the torsion housing off the tail section and removing, is the center section (with main shafts and gears) simply held to the pinion section by the bolts on the outside of the case? Is there anything else that must be pulled before the pinion and center section can be pulled apart? https://cimg8.ibsrv.net/gimg/www.aud...517f5e96a6.jpg https://cimg2.ibsrv.net/gimg/www.aud...1f40ab0961.jpg https://cimg5.ibsrv.net/gimg/www.aud...64a362a62f.jpg |
Originally Posted by P4Ring
(Post 24775746)
Yes..see picture. It just pulls out after removing bolts. The shafts are stabilize axially from the rear end.
Superb. |
Thanks for the great video! Any chance you have another video on the clutch assembly? Great insight.
|
| All times are GMT -8. The time now is 01:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands