The four 2 pin device control connectors on/near/under the AAN intake manifold
08-07-2013, 12:42 PM
#1
AudiWorld Super User
Thread Starter
The four 2 pin device control connectors on/near/under the AAN intake manifold
There are four such connectors, as shown in this photo. They are generally colour-coded but there is a duplication on the black ones. It is physically possible cross-connect some of them if you are totally colour blind. This post is intended to help prevent that.
Starting at the G42 Intake Air Sensor and going anti-clockwise, the connector and wire colours are as follows:
The brown G42 IAT connector:
The black ISV connector:
The blue N80 Evaporative Emission Frequency Valve connector
The black Auxiliary After-run pump connector (two pin, three wires so not to be confused with the N71 ISV connector):
These photos will be added to their respective posts and linked back to this post.
Starting at the G42 Intake Air Sensor and going anti-clockwise, the connector and wire colours are as follows:
The brown G42 IAT connector:
The black ISV connector:
The blue N80 Evaporative Emission Frequency Valve connector
The black Auxiliary After-run pump connector (two pin, three wires so not to be confused with the N71 ISV connector):
These photos will be added to their respective posts and linked back to this post.
Last edited by UrS4boy; 08-08-2013 at 06:46 AM.
Thread
Thread Starter
Forum
Replies
Last Post
ECS Tuning-Audi
A4 (B8 Platform) Discussion
21
09-11-2021 04:04 PM
Cmmartin23
Parts For Sale - Archive (NO NEW POSTS HERE)
26
08-23-2016 04:44 PM
ECS Tuning-Audi
Audi A5 / S5 / RS5 Coupe & Cabrio (B8)
0
09-01-2015 08:27 AM
