Pre95

Any word on the 7A Turbo kit pricing / specifications? I got a new job... and a new line of credit

nate @ 034MOTORSPORT

It's coming along nicely, and really makes the kit super easy to install.

Pricing is coming in at $2700 for the Stage 1 kit, stock compression, stock MAF.
This includes the exhaust manifold, intake plumbing, downpipe, chip tuning, turbo, oil lines, and air filter setup.

We'll be doing a 1+ kit with the big bore 12v maf as well very soon.

Just had the coupe on the dyno last night, was making 155whp with this exact setup, and there's lots more left in the hardware with some other mods (compression dropping gasket, IC, and injectors and you've got a very strong setup). We're getting a baseline 7a test on this dyno soon. My motor made ~120whp in stock form on a different dyno, but it's hard to compare the two.

Here's one of the pulls from last night:
<img src="http://pictureposter.audiworld.com/55859/7a_cqt_stage1_initial_tune3.jpg">

Pre95

Price seems more then fair! Yea I was wondering if you were running the compression lowering gasket or not.

I guess the only question left is will she smog (at a test only... in california...)

nate @ 034MOTORSPORT

The tune is running with full smog controls, shouldn't be a problem provided all yer bits are good.

nothing

I was under the assumption that the 7A turbo kit was going to include an 034 ECU, but I do admit that I haven't been paying attention lately.

Are you making a harness available for the MAF swap?

That looks like a very nice power increase for stock ECU and compression. Good work!

nate @ 034MOTORSPORT

This is all with the stock ECU, the 034 Ic ECU is still an option, and more flexible.

Mcstiff

Cost of the ECU only?