AudiWorld Forums - View Profile: haggisuk

Go Back  AudiWorld Forums > Members
Reload this Page >

haggisuk's Profile

haggisuk haggisuk is offline

AudiWorld Senior Member

About Me

  • About haggisuk
    Quoted text
    No
    Location
    UK

Statistics

Total Posts
Visitor Messages
Total Likes
General Information
  • Last Activity: 06-23-2019 09:59 AM
  • Join Date: 05-02-2013
  • Referrals: 0

Friends

Showing Friends 1 to 1 of 1
  • aTOMic
    • aTOMic
    • AudiWorld Senior Member
    • aTOMic is offline

Visitor Messages

Showing Visitor Messages 1 to 3 of 3
  1. 10-15-2018 06:44 AM - permalink
    Final part

    ​​​​​​My guess is the big black connector connects to the RVC module, the little black connector connects to the OEM rear view camera, the little o-ring connected with the red gourmet is the ground, The two tiny grey cables without connectors are what connect to the CAN low and CAN high on the PDC unit. That leaves only the grey with the silver edge, and from my understanding it is not compatible with my situation. am i right ?

    So what harness can i buy?

    I know these are alot of questions but any help will be much appreciated.

    cheers!
    Gerald

  2. 10-15-2018 06:43 AM - permalink
    continuation

    ​​​​​​Since i am using the Fakra female to RCA cable on the rear view aftermarket camera, the RCA part connects to the rear view camera, and the fakra female part connects to the grey fakra male on the RVC module. Is that right ?

    Since i do not have a tv tuner, that means i can leave the brown Fakra connector on the RVC module empty. Is that right ?

    So now my problem what cable or wiring harness do i use i plug in the big black connector on the RVC module, and the CAN low, CAN high on the PDC unit ?

    Is there a wiring harness for a setup without the tv tuner ? Because i looked the kufatec wiring harness you used, it has 6 separate connectors. https://www.kufatec.co.uk/shop/en/au...i-a8-4e-mmi-2g
  3. 10-15-2018 06:41 AM - permalink
    Hello haggiuk, i looked at your thread on forum.a8parts.co.uk on factory reverse camera retrofit on the D3. It is quite well presented but i am lacking some information to do this project.
    I own an 05 3.0 tdi D3 european, and i do not have a Tv tuner nor adaptive cruise control. My question is: is there any wiring harness i can buy to connect the RVC module 4E0910441, the PDC unit 4E0910283C, and the rear view camera itself (aftermarket with Fakra Female to RCA cable) ?

    Because from my understanding, the green fakra from the MMI head unit interface in the glove box connects to the the green fakra male connector in the middle of the RVC module. So far thatīs what i am 100% sure of.

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.