AWD Dyno Day in Troy MI (Updated)
#1
AWD Dyno Day in Troy MI (Updated)
Hello all, I'm looking to set up a Dyno day at Payn Technologies of Troy MI for Quattro Club members or any other Audi that would be interested in getting a baseline dyno session on their Audi. For now I'm looking for about 8-10 people for a Saturday in September, most likely the 13th. People signing up can expect to get 2-3 passes on the dyno for baseline feedback only, and it would be exclusive to us only. Any other tuning done to your car would just take more time away from other people, and must be ok with them. Let it also be known that automatic transmissions will take longer to get a baseline setup. All those interested, let me know.
Pete Mullin
Ratamaque011@aol.com
Pete Mullin
Ratamaque011@aol.com
#3
Someone needs tuning...
John, that picture says it all. In fact, your Audi is basically the reason we're doing this. The guys at Payn Tech have heard about your car, and would love to help you out.
Pete
Pete
#4
Dyno Day Date at Payn Tech Set!!
The date for a dyno day at Payn Technologies has been set for Sept. 13th on Saturday. Here's how it works. I only have 10 openings at the most, and I've already taken two names. PLEASE let me know as soon as possible so that no one has to freak out about a last minute issue.
Cost is $100 a person, and that will get you at LEAST 2 pulls on the dyno. And that's only if someone were to have a failure on the dyno, or if everyone other person that signed up has an automatic transmission. Not to knock you auto guys, but they just take a little longer to set up a baseline. Payn Tech just recently ran an S4 with an auto and it put down some impressive numbers.
I hope to hear from everyone soon!
Pete Mullin
(248) 763-1133
Ratamaque011@aol.com
Cost is $100 a person, and that will get you at LEAST 2 pulls on the dyno. And that's only if someone were to have a failure on the dyno, or if everyone other person that signed up has an automatic transmission. Not to knock you auto guys, but they just take a little longer to set up a baseline. Payn Tech just recently ran an S4 with an auto and it put down some impressive numbers.
I hope to hear from everyone soon!
Pete Mullin
(248) 763-1133
Ratamaque011@aol.com
Thread
Thread Starter
Forum
Replies
Last Post
Shooter McGavin
Midwest Discussion
3
02-27-2006 12:15 PM
Todeshandler
S4 / RS4 (B5 Platform) Discussion
58
07-14-2004 02:58 PM