Grim Reaper

catch can install pics....anyone?

urS4guy

This is of course an AAN on a 93 urS4.
<img src="http://pictureposter.audiworld.com/15038/polished_engine.jpg">

Here's a closeup.
<img src="http://pictureposter.audiworld.com/15038/img_0507.jpg">

Hap, showin dahkine catch can in Evahboost

Grim Reaper

I was thinking of putting one in but contemplatin the cost and what not.

fusilier

<center><img src="http://www.bufkinengineering.com/103204progress04.JPG"></center><p>
Vents off the back of the cam cover. Down around the back of the block and forward to the can. Top of the can is a removable air filter with a shiney shield facing forward. The bottom has a built in drain.

urS4guy

This is an oval track and drag race shop here in the Denver area. They have lots of very pretty fittings and such in anodized aluminum;-) Use the link and scroll down. I think I only paid about $85 but the fittings were another $25 or so. They also make a taller and thinner version. This one best fit my needs.HTH

Hap, talkin dahkine<ul><li><a href="http://www.petersonfluidsys.com/tankacc.html">http://www.petersonfluidsys.com/tankacc.html</a</li></ul>

Mat Indukts Lambos

<center><img src="http://pictureposter.audiworld.com/54525/shoppics804_019.jpg"></center><p>

WJM

<center><img src="http://www.wseng.com/a4/catchcan/breather.jpg"></center><p>

Andy_FL

BLING, where can I get an expansion tank cap like that?! ;-)

kday

Does it vent to atmosphere, or back to the intake like stock?

I'm wondering whether that air/oil mixture coming out of the crankcase should be treated as metered air or not. I suppose it depends on where it came from, right?

Nice car by the way.

WJM

or just get a can of silver spray paint =)

I was bored... it looked good when I did it with the engine cover on, etc etc.