Has anybody ever had more than 230 hp in a 12v? What did u do, use a different CPU? or run with...
12-19-2001, 06:52 PM
#2
AudiWorld Super User
Join Date: Jul 2000
Posts: 5,291
Likes: 0
Received 0 Likes
on
0 Posts
Paul Lambert says they make about 270Hp with their 12V but ...
The engine is wrung out quite a bit and they are using an aftermarket engine ecu. I managed to chat with him last Saturday for a short while. He didn't go into too many details though. His car is setup for competition though.
12-21-2001, 07:20 PM
#3
AudiWorld Senior Member
Join Date: Sep 2001
Location: Salt Lake City, UT
Posts: 1,044
Likes: 0
Received 0 Likes
on
0 Posts
Re: Paul Lambert says they make about 270Hp with their 12V but ...
<center><img src="http://members.aol.com/kenwoodsc/images/audi2.jpg"></center><p>I'm going to try to squeeze some more power out of my 12v. I'm going with a cat back exhaust, high flow cat (or may remove), bigger throttle body and mass air sensor (not sure who makes, anyone have any links?) I'd like to find a supercharger or bolt on turbo kit. Do the 12v's have forged internals? If I ever pull the heads they are going to recieve a port and polish job along with an improved camshaft. I'm going to mostly make the car handle better and make it a little quicker although I'd like to really make it get up and run.
-Scott-
1993 Black 100CS Quattro 5-sp.
-Scott-
1993 Black 100CS Quattro 5-sp.
12-21-2001, 09:57 PM
#4
AudiWorld Super User
Join Date: Jun 2001
Posts: 6,555
Likes: 0
Received 0 Likes
on
0 Posts
Yup..
A custom turbo job has been done by a fellow 12v'r. Not to mention a list of other upgrades that have been done to the car but it should be seeing hp in the 400+ mark.
Along w/ Paul L. @ Stassis Engineering, they both are using seperate/stand alone ECU's by MoTec and I believe Rob is using WinTecII.
Along w/ Paul L. @ Stassis Engineering, they both are using seperate/stand alone ECU's by MoTec and I believe Rob is using WinTecII.
12-23-2001, 12:22 PM
#5
AudiWorld Super User
Join Date: Jul 2000
Posts: 5,291
Likes: 0
Received 0 Likes
on
0 Posts
Take a look and see if they have anything for your engine...
Here are some cam manufacturers. E-mail them to find out what they have. They don't always list everything on their web site.
http://www.kentcams.com
http://www.pipercams.co.uk
It shouldn't be too hard to find more info about your engine. 12V.org might be a good place to start...<ul><li><a href="http://www.12v.org/index.html">http://www.12v.org</a></li></ul>
http://www.kentcams.com
http://www.pipercams.co.uk
It shouldn't be too hard to find more info about your engine. 12V.org might be a good place to start...<ul><li><a href="http://www.12v.org/index.html">http://www.12v.org</a></li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
Justin517
Audi 90 / 80 / Coupe quattro / Cabriolet
4
02-28-2007 03:56 PM
BJC::wokka wokka
A4 (B5 Platform) Discussion
18
12-06-2006 05:21 AM
phoneyman
A4 (B5 Platform) Discussion
7
07-22-2005 09:49 PM
ajp_984
TT (Mk1) Discussion
17
11-19-2004 01:27 PM
AznSpik45
Performance and Tuning
12
04-07-2003 05:33 PM