T3/T4E install, day two.....
08-26-2002, 05:53 AM
#1
AudiWorld Senior Member
Thread Starter
Join Date: Jul 2001
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
T3/T4E install, day two.....
<center><img src="http://pictureposter.audiworld.com/21967/p8250018.jpg"></center><p>here's a pic of the new turbo installed, with a comparison to the old, K03.
08-26-2002, 05:58 AM
#4
AudiWorld Senior Member
Thread Starter
Join Date: Jul 2001
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
pic 4, at the end of the day.....
<center><img src="http://pictureposter.audiworld.com/21967/p8250022.jpg"></center><p>coolant lines are hooked up, and the downpipe. Now I need to figure out the oil feed line, and the intake snorkel. Oil return tube just needs a 1-2 inch peice, and that'll be connected. Anyone want to make/sell me a custom intake?
08-26-2002, 06:00 AM
#5
AudiWorld Senior Member
Thread Starter
Join Date: Jul 2001
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
pic 5, exhaust for sale
<center><img src="http://pictureposter.audiworld.com/21967/p8250021.jpg"></center><p>
on the right is the 1.8TQ borla cat-back exhaust, for sale. Was only on the car for about 3-4 months, cost is $470 new, asking $350. Comes with downpipe, not shown.
Exhaust on the left is the cat-back from a '00 S4, Borla 3". This will be mated to the 3" downpipe for a very free flowing exhaust for the T3/T4E setup.
on the right is the 1.8TQ borla cat-back exhaust, for sale. Was only on the car for about 3-4 months, cost is $470 new, asking $350. Comes with downpipe, not shown.
Exhaust on the left is the cat-back from a '00 S4, Borla 3". This will be mated to the 3" downpipe for a very free flowing exhaust for the T3/T4E setup.
