Trouble with pes exhaust manifold installation.
#1
Trouble with pes exhaust manifold installation.
I am in the proccess of bolting on my manifold but I can hardly get to the top nuts. It's at a ****ed up angle and I can barely turn the nut, let alone get a tool in there. If anybody who has installed this kit knows what I am talking about please reply. What have you done or what tools did you use. I am starting to loose it.
Tim
Tim
#2
Just have to take your time and turn them a little at a time
or what others have said, use a crows foot wrench. I know juan made his own wrench to do the top nuts, you can also try calling PES up on monday and ask them.
Trending Topics
#9
this was a biatch.
I heated up a small open face wrench and bent it to a nice angle, i also used a straight open wrench. A lot of people use a crows foot though, which is a open faced wrench that will fitt on a socket extension.
Thread
Thread Starter
Forum
Replies
Last Post
JPRobertsons
A4 (B5 Platform) Discussion
4
08-03-2007 10:30 AM
StevenH
Performance and Tuning
12
06-08-2003 08:02 AM
T-28-Quattro de VT
A4 (B5 Platform) Discussion
3
09-18-2002 07:15 AM
T-28-Quattro de VT
A4 (B5 Platform) Discussion
6
09-17-2002 07:32 PM