Performance and Tuning Discussion forum for various performance tuning techniques and questions

What should the MAF readings be on a PES T-28

Thread Tools
 
Search this Thread
 
Old 09-03-2003, 08:30 AM
  #1  
AudiWorld Super User
Thread Starter
 
RAD69's Avatar
 
Join Date: Sep 2001
Location: Central NJ
Posts: 3,019
Likes: 0
Received 0 Likes on 0 Posts
Default What should the MAF readings be on a PES T-28

I am nDBW and have a 1.5 bar chip - which used to get 22psi consistently.

Now I am getting about 19psi which drops to 17psi or so in first and second. Third-fifth see 19-20psi - but then it suddenly jumps up to 22-23 around 5k or so - somewhat random.

I checked all the hoses - they seem fine. I am suspicious of the the n75 valve. On nDBW - what block logs requested boost? is there one?

TIA -

I datalogged a 2-4 gear pull on the turnpike:

Time RPM Load Inj MAF O2
88.71 840 1.05 1.98 2.84 0.74
89.39 1080 1.7 3.39 5.83 0.215
90.11 1960 1.35 2.5 8.68 0.82
90.79 2680 1.1 1.86 9.17 0.855
91.46 2840 0.6 1.09 5.83 0.1
92.12 2960 1.3 2.18 12.5 0.045
92.77 2840 1.2 2.11 10.97 0.16
93.43 2720 0.9 1.54 7.98 0.76
94.14 2680 1.4 3.07 11.53 0.105
94.8 4560 5.05 10.43 73.33 0.83
95.48 5480 8.05 16.32 139.44 0.895
96.17 6200 9 16.32 178.33 0.9
96.88 6760 8.6 16.32 185.56 0.865
97.6 5840 6.4 14.59 117.98 0.72
98.28 4760 0.9 1.34 13.61 0.915
98.96 3640 10.3 16.32 119.72 0.92
99.63 5280 10 16.32 168.54 0.93
100.3 5720 9.85 16.32 178.82 0.87
100.97 5600 9.95 16.32 177.71 0.87
101.65 6000 9.5 16.32 180.83 0.87
102.36 5920 1 16.32 17.71 0.865
103.02 4360 10.2 16.32 141.81 0.94
103.72 4680 10.55 16.32 157.29 0.905
104.37 4920 10.55 16.32 165.69 0.895
105.05 5160 10.35 16.32 170.14 0.885
105.72 5400 10.15 16.32 175.28 0.875
106.38 5640 10.05 16.32 179.44 0.865
107.08 5840 9.9 16.32 184.31 0.86
107.79 6040 9.7 16.32 186.11 0.855
Old 09-03-2003, 08:44 AM
  #2  
Junior Member
 
Afrosquad's Avatar
 
Join Date: Apr 2000
Posts: 1,523
Likes: 0
Received 0 Likes on 0 Posts
Default

Looks like your injectors are maxed out.
Old 09-03-2003, 09:45 AM
  #3  
Senior Member
 
nospek3's Avatar
 
Join Date: Sep 2000
Posts: 6,413
Likes: 0
Received 0 Likes on 0 Posts
Default

.
Old 09-03-2003, 09:48 AM
  #4  
Senior Member
 
nospek3's Avatar
 
Join Date: Sep 2000
Posts: 6,413
Likes: 0
Received 0 Likes on 0 Posts
Default

.
Old 09-03-2003, 10:21 AM
  #5  
AudiWorld Super User
Thread Starter
 
RAD69's Avatar
 
Join Date: Sep 2001
Location: Central NJ
Posts: 3,019
Likes: 0
Received 0 Likes on 0 Posts
Default I knew that there is no block for actual, but I thought there was requested boost.

I logged block 2 and block 31 for the O2 readings.
Old 09-03-2003, 10:41 AM
  #6  
Member
 
Yippers®'s Avatar
 
Join Date: May 2001
Posts: 17,322
Likes: 0
Received 0 Likes on 0 Posts
Default

Nope . .boost gauge is your only boost resource
Old 09-03-2003, 10:42 AM
  #7  
Member
 
Yippers®'s Avatar
 
Join Date: May 2001
Posts: 17,322
Likes: 0
Received 0 Likes on 0 Posts
Default

o2 looks good though ...
Old 09-03-2003, 12:36 PM
  #8  
Junior Member
 
Afrosquad's Avatar
 
Join Date: Apr 2000
Posts: 1,523
Likes: 0
Received 0 Likes on 0 Posts
Default yep...

just noticed the infamous 16.32ms.
Old 09-04-2003, 06:10 AM
  #9  
Elder Member
 
Audi2ptzero's Avatar
 
Join Date: Sep 2002
Posts: 14,366
Likes: 0
Received 0 Likes on 0 Posts
Default I think part of it is block 002 or 003 and the 02 sensor is block 031.

I dont think there is a single block that gives all that info.
Old 09-04-2003, 06:58 AM
  #10  
Senior Member
 
nospek3's Avatar
 
Join Date: Sep 2000
Posts: 6,413
Likes: 0
Received 0 Likes on 0 Posts
Default

.


Quick Reply: What should the MAF readings be on a PES T-28



All times are GMT -8. The time now is 09:55 PM.