Removing rear head restraints on 2014 Q5
#1
Audiworld Junior Member
Thread Starter
Join Date: Jul 2013
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Removing rear head restraints on 2014 Q5
Just picked up my new 2014 3.0 Q5 Prem plus. Was trying to install a child's car seat in the rear but the head restraint is making it difficult. The service folks at the dealer couldn't seem to remove them but they were able to remove them from a 2012 Q5. They said they'd look into it, but was wondering if anyone here with a 2014 Q5 had tried to remove them.
#2
AudiWorld Super User
You have a version 2, which requires the use of special tools 3371
Show this to the dealer
Perhaps this will help
Show this to the dealer
Perhaps this will help
Last edited by spijun; 10-05-2013 at 12:02 AM.
#3
Audiworld Junior Member
Thread Starter
Join Date: Jul 2013
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Thank you spijun, this is extremely helpful! It looks like this is a simple tool and that if I had it I could do this myself. Does that sound right? I'll search around the web to see if it is obtainable. I don't want to have to go a dealer every time I need to remove the headrest since there are times where I need to remove the child seat to allow adults to sit in the back.
#5
AudiWorld Super User
MY 2013 USA Hybrid (or, sports seat option?) has these locking headrests too
Perhaps other 2013's as well?; mine has the Sport seat option if that matters.
I ran into this in Europe when I wanted to remove a headrest so I could put a suitcase vertically behind the driver's seat in the footwell with the rear passenger seat also folded down and the headrest otherwise sticking too far forward.
Annoying safety nanny feature was my reaction. Audi's always worked fine with the "old" system. Something tells me this interlock is somehow magically not going to work once I play with it a bit...
I ran into this in Europe when I wanted to remove a headrest so I could put a suitcase vertically behind the driver's seat in the footwell with the rear passenger seat also folded down and the headrest otherwise sticking too far forward.
Annoying safety nanny feature was my reaction. Audi's always worked fine with the "old" system. Something tells me this interlock is somehow magically not going to work once I play with it a bit...
Last edited by MP4.2+6.0; 10-05-2013 at 08:00 AM.
#6
Audiworld Junior Member
Thread Starter
Join Date: Jul 2013
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Easier than I thought
Turns out you don't need this tool, you really just need any thin hard piece of plastic or even the back end of a butter knife. A credit card works fine. You just slip it under that plastic cap and push a bit towards the pillar, while pushing the tab on the other pillar. What I somehow missed originally when looking at the pics above is that that buried release device is on the pillar opposite the one that has the exposed release (if facing the seats, the hidden one is on the left, the one you press to move the restraint up and down is on the right). If I had to guess, there will be a number of owners with children and car seats who will struggle for a while with this. It's hard to properly fit some of the car seats in without removing the headrest.
Trending Topics
#8
Turns out you don't need this tool, you really just need any thin hard piece of plastic or even the back end of a butter knife. A credit card works fine. You just slip it under that plastic cap and push a bit towards the pillar, while pushing the tab on the other pillar. What I somehow missed originally when looking at the pics above is that that buried release device is on the pillar opposite the one that has the exposed release (if facing the seats, the hidden one is on the left, the one you press to move the restraint up and down is on the right). If I had to guess, there will be a number of owners with children and car seats who will struggle for a while with this. It's hard to properly fit some of the car seats in without removing the headrest.
Last edited by Gossip Girl; 10-06-2013 at 08:03 AM.
#9
AudiWorld Super User
I wanted to reverse the front headrests but was told that was impossible because they are connected to the collision detection system. Reversing them is actually a much better and more comfortable position for your neck. And much safer, too, according to my physical therapist. Does anyone know if you can do the same thing to the front headrests? Not remove them, just reverse them.
#10
I strongly recommend against doing this. The headrests were designed by automotive engineers whose job it is do so such things, as well as crash tested by various agencies who are are also experts in such matters. What does you physical therapist know about reducing head and neck movement in collisions? We're the headrests crash tested in a reverse position?