JaXeN

Don't have my papers with me, but it was approximately $2.2k , all in.

I basically paid the prices listed on the Hartmann and Tirerack sites respectively, plus shipping to Niagara Falls NY.

JBDinTX

Did you need spacers with those wheels

JaXeN

No spacers required @ET25, the ET38's reportedly need 5mm spacers.
The wheels are hub centric.

Different bolts are required if you're coming from the 21" SQ5 wheels... Not sure if the same applies if you're coming from the 20".

Dusts4

i have 19 x 9.5 et 40 that I test fit and did not have any rubbing, fitted them with 255/50/19 snows. Interesting that the et38 needed spacers. It is a little tight, but the wheel spun freely without rubbing on anything.

JBDinTX

Does anyone know if a 20x8.5 5x112 offset ET: 45 hub bore 66.6 work for my SQ5

JaXeN

Only way to be 100% sure is to do a test fit, but chances are that it would be a no go.

The bolt pattern and hub bore are fine, but an offset of 45mm on a 8.5 wheel would give you 12mm less clearance than stock. (Assuming identical wheel design profiles)

Very unlikely that it would fit.

JaXeN

Probably had a lot to do with the wheel design.
There are a few 19" ET38 wheels on the Hartman site that don't require spacers for that same reason.

spijun

Audi OEM wheels 19" has four models with ET39 and one model ET27

JBDinTX

I really like the this wheel. But if it won't work Thank everyone. I will keep looking

JaXeN

What wheel is it?

If you like it that much, you could always try a test fit... you never know!
Worst case scenario, you could just get some spacers and be good to go.

I've lived with spacers on many of my past cars and they're not that big of a deal.
They were a better soloution than passing up on wheels I really liked. :-)