■ I need help for 08 Q7 emergency■
#1
AudiWorld Junior Member
Thread Starter
Join Date: Mar 2017
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
■ I need help for 08 Q7 emergency■
So
Im trying to pull the trim out from MMI section for wraping and this stupid connector driving me nuts.
Does anybody knows what type of connector is this and how to pull this out from the button?
I tried everything but still cant figure it out how !!!
Its power cable for the 08 Q7 3.0TDI Start and Stop button.
Idk y Audi put this connector but one thing i know is they r s as f
Plz save me guys
I spent 3 hours to try to take this **** out.
Im trying to pull the trim out from MMI section for wraping and this stupid connector driving me nuts.
Does anybody knows what type of connector is this and how to pull this out from the button?
I tried everything but still cant figure it out how !!!
Its power cable for the 08 Q7 3.0TDI Start and Stop button.
Idk y Audi put this connector but one thing i know is they r s as f
Plz save me guys
I spent 3 hours to try to take this **** out.
#2
AudiWorld Senior Member
I had a similar issue once..
In the attached image it looks to me like you need to push on the underside of the connector to release the catch. This is just a guess but it looks very much like the one i encountered. it is counter intuitive as it is on the underside that is hard to get with your fingers but a screwdriver blade works great you need to push in the direction of the arrow ... good luck
Last edited by flynavy; 01-18-2022 at 06:10 AM.
#3
AudiWorld Junior Member
Thread Starter
Join Date: Mar 2017
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Yeah i tried
In the attached image it looks to me like you need to push on the underside of the connector to release the catch. This is just a guess but it looks very much like the one i encountered. it is counter intuitive as it is on the underside that is hard to get with your fingers but a screwdriver blade works great you need to push in the direction of the arrow ... good luck
i tried for about an hour with long nose and it didn't work that way lol thats y u see the gap there lol
There was no gap there at the first place =(
#5
AudiWorld Junior Member
Thread Starter
Join Date: Mar 2017
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Dangggg
Thread
Thread Starter
Forum
Replies
Last Post
ac921ol
S4 / RS4 (B5 Platform) Discussion
1
09-16-2007 01:32 PM
bostonfan
A4 (B5 Platform) Discussion
3
12-11-2001 09:23 AM