UPDATE: SMOKING URQ PROJECT
#1
UPDATE: SMOKING URQ PROJECT
<center><img src="http://pictureposter.audiworld.com/64572/110_1075.jpg"></center><p>
future:
1. complete repaint
2. update interior with '85 dash and center console
3. sport quattro hood
4. larger rear spoiler
***cut and paste the links, for some reason they don't come up***
currently:
1. IA chip and 2 bar wastegate spring
2. 2bennet coil over racing suspension, eibach springs, koni adjustable shocks, coil-over thread
3. brembo rotors
4. a4 calipers, w/ ss lines
http://pictureposter.audiworld.com/64572/110_1047.jpg
5. s4 17" with 235/40 tires
http://pictureposter.audiworld.com/64572/110_1077.jpg
6. further modified ecu and wastegate
7. recaro srd with matching cloth on rear seats
http://pictureposter.audiworld.com/64572/109_0985.jpg
8. momo race shift **** and steering wheel
9. euro headlights and grill
10. rear euro smoked tailights w/dual H.I.D.
http://pictureposter.audiworld.com/64572/109_0984.jpg
11. "fixed" catalytic
12. stebro exhaust cat-back
what do you guys think? if anyone has any questions on anything that i did, or comments please do not hesitate to write back.
i also need help locating a sport quattro hood that will fit on the URQ and i am also looking for a rear spoiler, not the original and not the group b one, something in-between. i will consider a group b if i can get it relatively cheap. i am also looking for the updated dash, center console and door panels.
thanks!
ben
future:
1. complete repaint
2. update interior with '85 dash and center console
3. sport quattro hood
4. larger rear spoiler
***cut and paste the links, for some reason they don't come up***
currently:
1. IA chip and 2 bar wastegate spring
2. 2bennet coil over racing suspension, eibach springs, koni adjustable shocks, coil-over thread
3. brembo rotors
4. a4 calipers, w/ ss lines
http://pictureposter.audiworld.com/64572/110_1047.jpg
5. s4 17" with 235/40 tires
http://pictureposter.audiworld.com/64572/110_1077.jpg
6. further modified ecu and wastegate
7. recaro srd with matching cloth on rear seats
http://pictureposter.audiworld.com/64572/109_0985.jpg
8. momo race shift **** and steering wheel
9. euro headlights and grill
10. rear euro smoked tailights w/dual H.I.D.
http://pictureposter.audiworld.com/64572/109_0984.jpg
11. "fixed" catalytic
12. stebro exhaust cat-back
what do you guys think? if anyone has any questions on anything that i did, or comments please do not hesitate to write back.
i also need help locating a sport quattro hood that will fit on the URQ and i am also looking for a rear spoiler, not the original and not the group b one, something in-between. i will consider a group b if i can get it relatively cheap. i am also looking for the updated dash, center console and door panels.
thanks!
ben
#2
Lookin good. About the seats...
Those look great in there and that's exactly what I've been planning to do. Did you use Recaro's sliders? What floor mounting brackets did you use?
Thanks,
Rich
P.S. The car looks awesome on those Avus wheels.
Thanks,
Rich
P.S. The car looks awesome on those Avus wheels.
#3
Re: Lookin good. About the seats...
i used the recaro sliders, with the original hand lever from the audi seats (for moving fwd and bkwd) in addition it is good to change the seat rail guides so there isn't too much play in the seat.
thanks for the comments, i hope this helps
-ben
thanks for the comments, i hope this helps
-ben
Thread
Thread Starter
Forum
Replies
Last Post
Bob W.
RS4 (B7 Platform) Discussion
6
09-20-2007 04:44 PM
tecknoquatt
Audi 90 / 80 / Coupe quattro / Cabriolet
8
05-07-2004 09:52 AM
Leo
A4 (B5 Platform) Discussion
19
04-13-1999 06:24 AM