303 on matte plastic parts
#1
AudiWorld Uber User
Thread Starter
303 on matte plastic parts
I started with a microfiber wax applicator that I dampened, then squeezed any excess moisture from it. Added 4 full spritzes of 303 Protectant to it. Then I wiped the applicator over the areas to be treated, making several passes if it was immediately absorbed.
Here it is right after application, on only the right hand side of the dash:
<img src="http://pictureposter.audiworld.com/3127/303-dash-before-wipe.jpg">
I waited 5 minutes, using the time to apply to other portions of the car. Then I wiped it with an ever so slightly dampened microfiber cloth to even out the application:
<img src="http://pictureposter.audiworld.com/3127/303-dash-wiped-down.jpg">
Note, the left side has not been treated yet.
And here it is after wiping on the rear deck area, which is matte:
<img src="http://pictureposter.audiworld.com/3127/303-hood-cover.jpg">
Here it is right after application, on only the right hand side of the dash:
<img src="http://pictureposter.audiworld.com/3127/303-dash-before-wipe.jpg">
I waited 5 minutes, using the time to apply to other portions of the car. Then I wiped it with an ever so slightly dampened microfiber cloth to even out the application:
<img src="http://pictureposter.audiworld.com/3127/303-dash-wiped-down.jpg">
Note, the left side has not been treated yet.
And here it is after wiping on the rear deck area, which is matte:
<img src="http://pictureposter.audiworld.com/3127/303-hood-cover.jpg">
Trending Topics
#8
AudiWorld Uber User
Thread Starter
The Cab gets TT meets saloon. Huge air flow from those vents if need be.
<ul><li><a href="https://www.audiworld.com/news/02/a4cab/content.shtml">Audi 'verts age well</a></li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
Roger @ CA
Mid Atlantic Discussion
4
12-26-2006 08:53 AM
CJ Miller
Audi 90 / 80 / Coupe quattro / Cabriolet
1
12-11-2003 04:43 PM
Vincent in Montreal
A6 / S6 (C5 Platform) Discussion
23
04-04-2002 03:08 AM