Bought Dynolicious for the IPhone. RS4 Results
#1
AudiWorld Senior Member
Thread Starter
Join Date: Feb 2002
Posts: 1,529
Likes: 0
Received 0 Likes
on
0 Posts
Bought Dynolicious for the IPhone. RS4 Results
Seems pretty accurate almost same numbers i yielded with a G Tech Pro.
Did Three Runs, all runs were within a tenth of a second of each other so that seems pretty accurate to me.
Best Run:
Acceleration
0-10 MPH .47 sec
0-20 MPH 1.07 sec
0-30 MPH 1.63 sec
0-40 MPH 2.16 sec
0-50 MPH 3.09 sec
0-60 MPH 4.14 sec
0-70 MPH 5.52 sec
0-80 MPH 7.57 sec
Elapsed Time:
60' 1.95 sec @ 34.4 MPH
330' 5.24 sec @ 67.5 MPH
1/8 8.20 sec @80.8 MPH
Miscellaneous:
Max Speed 83.2 MPH
Max Acceleration 2.63 G's
Peak Horsepower 437 HP
Vehicle Info:
Weight 3950lbs
Drivetrain Loss 26%
Only Mods are a Resonated Valved Milltek, K&N Air Filter and Deflapped. On the three runs i had the Mufflers off, so only resonators.
Did Three Runs, all runs were within a tenth of a second of each other so that seems pretty accurate to me.
Best Run:
Acceleration
0-10 MPH .47 sec
0-20 MPH 1.07 sec
0-30 MPH 1.63 sec
0-40 MPH 2.16 sec
0-50 MPH 3.09 sec
0-60 MPH 4.14 sec
0-70 MPH 5.52 sec
0-80 MPH 7.57 sec
Elapsed Time:
60' 1.95 sec @ 34.4 MPH
330' 5.24 sec @ 67.5 MPH
1/8 8.20 sec @80.8 MPH
Miscellaneous:
Max Speed 83.2 MPH
Max Acceleration 2.63 G's
Peak Horsepower 437 HP
Vehicle Info:
Weight 3950lbs
Drivetrain Loss 26%
Only Mods are a Resonated Valved Milltek, K&N Air Filter and Deflapped. On the three runs i had the Mufflers off, so only resonators.
#6
So 3950 is the correct weight with driver? I've been trying to get an accurate weight input
and I wasnt sure if I should be using gross vehicular weight or GVW + driver.. not sure it makes much of a difference.
How did you launch?
How did you launch?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jet Jockey/A4 Pilot
Canadian Discussion
10
02-17-2009 05:45 PM
AuditudeRS4
NY / NJ / CT Discussion
2
09-01-2008 08:01 AM