Jet Jockey/A4 Pilot

First I use and aluminium sheet cut it down to fit the mounting area. Then II a right angle welded to the bottom of it. This right angle will be used to screw it to the tranny tunnel. I added industrial grade Velcro to it.

<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ECUMountingPlate-April2008003.jpg">


I then installed Velcro to the back side of the ECU.

<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ECUMountingPlate-April2008004.jpg">

The mounting plate was then secured in place by three metal screws on the top that screwed into the transversal steel beam. The bottom part of the mounting plate is secured by two metal screws through the tranny tunnel.

<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ECUMountingPlate-April2008005.jpg">


Head on view of the mounting plate and ECU in place. Of course you won't really see this when the new centre console is installed.

<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ECUMountingPlate-April2008006.jpg">

Bob W.

curious...when was the last time you drove this car?

Jet Jockey/A4 Pilot

Few months ago Bob when I brought it back from the roll cage shop. I did start it a few times since.

|skolnick

Nice RS4