AudiWorld Forums

AudiWorld Forums (https://www.audiworld.com/forums/)
-   RS4 (B7 Platform) Discussion (https://www.audiworld.com/forums/rs4-b7-platform-discussion-121/)
-   -   :: ECS Tuning :: B7 RS4 ECS H-Pipe Kit (https://www.audiworld.com/forums/rs4-b7-platform-discussion-121/ecs-tuning-b7-rs4-ecs-h-pipe-kit-2881724/)

ECS Tuning-Audi 04-09-2015 11:46 AM

:: ECS Tuning :: B7 RS4 ECS H-Pipe Kit
 
http://www.ecstuning.com/sales/ecs600header.jpg

Here's a "sound" investment that will give your Audi RS4 a voice worth listening to. ECS Tuning has developed an H-Pipe that replaces the OE resonator, producing a great outside exhaust note that won't drone you out of the interior.

As an added bonus, we've personally tested this H-Pipe numerous times on the dyno and found an extra 3-5 hp at 6000-8000 rpm. The H-pipe won't interfere with flapper valves in the rear mufflers.

Installation is a cut and clamp affair. Cut out the old resonator; clamp in the H-pipe.


A Sound Investment.

Click HERE to order or for more information
http://www.ecstuning.com/marketing/A...4_ECSHPIPE.jpg

Fits:
Audi B7 RS4 (2007-2008)

Let me know if you have any questions.

Jason

ELEVENS 04-10-2015 03:49 AM

I can attest to this mod, it's a great one, and IMO THE BEST bang-for-the-buck RS4 expense. I was one of the first to install one, and I've had my car for 9 years now.

The pipe will last several lifetimes. The only improvement I would make is to the clamps. The Michigan winter salt has eaten 3 of the stainless clamps. The metal is just too thin. I've replaces them with the MUCH thicker and more durable OEM-style clamps - 60mm, around $30 each. Yes they cost a lot more but it' s worthwhile up here in the Great White North.

Nice design, ECS Tuning.

ECS Tuning-Audi 04-13-2015 07:16 AM


Originally Posted by ELEVENS (Post 24675009)
I can attest to this mod, it's a great one, and IMO THE BEST bang-for-the-buck RS4 expense. I was one of the first to install one, and I've had my car for 9 years now.

The pipe will last several lifetimes. The only improvement I would make is to the clamps. The Michigan winter salt has eaten 3 of the stainless clamps. The metal is just too thin. I've replaces them with the MUCH thicker and more durable OEM-style clamps - 60mm, around $30 each. Yes they cost a lot more but it' s worthwhile up here in the Great White North.

Nice design, ECS Tuning.

Appreciate the feed back! Thanks for the order and continued support!

Jason


All times are GMT -8. The time now is 02:22 PM.


© 2024 MH Sub I, LLC dba Internet Brands