I Know I Know....Not the best pics in the world KW's Milltek and Wheels
 

He does not like the wheels but here are some pics anyway FYI the stocks are back on already!!!!

<center>
<img src="http://img.photobucket.com/albums/v196/ttoeller/RS4/DSC01972.jpg">&lt;br&gt;&lt;br&gt;
<img src="http://img.photobucket.com/albums/v196/ttoeller/RS4/DSC01970.jpg">&lt;br&gt;&lt;br&gt;
<img src="http://img.photobucket.com/albums/v196/ttoeller/RS4/DSC01969.jpg">&lt;br&gt;&lt;br&gt;
<img src="http://img.photobucket.com/albums/v196/ttoeller/RS4/DSC01968.jpg">&lt;br&gt;&lt;br&gt;
<img src="http://img.photobucket.com/albums/v196/ttoeller/RS4/DSC01967.jpg">&lt;br&gt;&lt;br&gt;
<img src="http://img.photobucket.com/albums/v196/ttoeller/RS4/DSC01966.jpg">&lt;br&gt;&lt;br&gt;
<img src="http://img.photobucket.com/albums/v196/ttoeller/RS4/DSC01965.jpg">&lt;br&gt;&lt;br&gt;
<img src="http://img.photobucket.com/albums/v196/ttoeller/RS4/DSC01963.jpg">&lt;br&gt;&lt;br&gt;
<img src="http://img.photobucket.com/albums/v196/ttoeller/RS4/DSC01962.jpg">&lt;br&gt;&lt;br&gt;
<img src="http://img.photobucket.com/albums/v196/ttoeller/RS4/DSC01961.jpg">&lt;br&gt;&lt;br&gt;
<img src="http://img.photobucket.com/albums/v196/ttoeller/RS4/DSC01960.jpg">&lt;br&gt;&lt;br&gt;
</center>

Gotta love that Milltek exhaust. . . nice tires/wheels as well.

Why do the exhaust tips stick out so far?...
 

I doubt if they are hot just after an install. My Milltek's are flush when cool, but only slightly come out when hot.

nice mirror stuck to the dash - mmm lame...

2nd, when hot stick out about an inch.
 

The photo was probably shot prior to the final install setting.

Hard to swallow that stainless steel expands an inch when hot

3rd. The system should be slid to the front of the car farther...
 

so that the tips are flush with the valance when cold. -Pete, Stratmosphere. 1.866.533.1777

good, glad he put the stock wheels back on. those do not visually fit the car

He's right about the wheels, they just don't pop on the RS4.

Re: 3rd. The system should be slid to the front of the car farther...
 

This is my car and the exhaust can only go fwd about 1/2 - 1 inch. Going to let it settle for a few days and then weld all the joints and remove the excess length. I hear what everyone else says but this one is resonated and sticks out too far - could be production variance.