Remember my dash which I kindly modified/lighten with a hole saw...
#1
AudiWorld Super User
Thread Starter
Join Date: Nov 2002
Location: Montreal, Canada
Posts: 18,597
Likes: 0
Received 0 Likes
on
0 Posts
Remember my dash which I kindly modified/lighten with a hole saw...
This one! LOL.
<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-Weightreduction-Jan052008012.jpg">
Now it looks like this.
<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ModifiedHVACInstall-Jan27-20080.jpg">
Remember this.
<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-Weightreduction-Jan052008011.jpg">
Now it looks like this.
<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ModifiedHVACInstall-Jan27-20-4.jpg">
We test fitted it in its proper position and this is what it looks like once in place. Note: The centre defrost vent is not installed yet however you can see the small defrost ports on the leading edge of the dash. I kept most of them in place the ones on the right side were removed.
<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ModifiedHVACInstall-Jan27-20-1.jpg">
Here's another view from the right side. You'll notice no centre vents and no side vents.
<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ModifiedHVACInstall-Jan27-20-2.jpg">
A look at the cluster location. Again no side vent for obvious reasons.
<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ModifiedHVACInstall-Jan27-20-3.jpg">
<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-Weightreduction-Jan052008012.jpg">
Now it looks like this.
<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ModifiedHVACInstall-Jan27-20080.jpg">
Remember this.
<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-Weightreduction-Jan052008011.jpg">
Now it looks like this.
<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ModifiedHVACInstall-Jan27-20-4.jpg">
We test fitted it in its proper position and this is what it looks like once in place. Note: The centre defrost vent is not installed yet however you can see the small defrost ports on the leading edge of the dash. I kept most of them in place the ones on the right side were removed.
<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ModifiedHVACInstall-Jan27-20-1.jpg">
Here's another view from the right side. You'll notice no centre vents and no side vents.
<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ModifiedHVACInstall-Jan27-20-2.jpg">
A look at the cluster location. Again no side vent for obvious reasons.
<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ModifiedHVACInstall-Jan27-20-3.jpg">
#2
AudiWorld Super User
nice, will you be racing wheel-to-wheel with this car?
or is all this weight savings and race car prep just for ****s and giggles?
curious, if you are competing, what kind of cars will you be classed against?
curious, if you are competing, what kind of cars will you be classed against?
#3
AudiWorld Super User
Thread Starter
Join Date: Nov 2002
Location: Montreal, Canada
Posts: 18,597
Likes: 0
Received 0 Likes
on
0 Posts
No more autocross for me but some Solosprint (SOLO 1), HPDEs and perhaps in the future...
Some kind of club/gentlemen racing (wheel to wheel) but with some sort of 13/13 rule where no contact is permitted.
#4
Just at the local audi tuner today
He let me look at an 01 S4 that was beyond stage 4 and included a ton of modifications like new heads and the engine overbored to be a 3 liter. Said it will push 700 hp on pump gas.
Was heading in to work and did not have alot of time to chat - but was amazed that they can take the engine so far.
Was heading in to work and did not have alot of time to chat - but was amazed that they can take the engine so far.
Thread
Thread Starter
Forum
Replies
Last Post
Jet Jockey/A4 Pilot
S4 (B6 & B7 Platforms) Discussion
13
01-29-2008 10:00 AM
Jet Jockey/A4 Pilot
Canadian Discussion
4
01-29-2008 06:44 AM
Jet Jockey/A4 Pilot
A4 (B6 Platform) Discussion
4
01-28-2008 12:23 PM
mdwsta4â„¢uroslut
Waterfest
0
07-12-2004 04:56 AM