Fluffhead

Sorry about the dirty pictures. I took most of them after the COI drive.

<b>Euro Front Bumper:</b>
<img src="http://images19.fotki.com/v353/photos/2/201040/4212683/DSC08894-vi.jpg">
I will take more pics this week or weekend

<b>Lidatek:</b>
<img src="http://images17.fotki.com/v28/photos/2/201040/4194898/DSC08803-vi.jpg">
<img src="http://images19.fotki.com/v32/photos/2/201040/4194898/DSC08805-vi.jpg">
<img src="http://images16.fotki.com/v30/photos/2/201040/4194898/DSC08806-vi.jpg">
<img src="http://images19.fotki.com/v353/photos/2/201040/4194898/DSC08807-vi.jpg">
<img src="http://images19.fotki.com/v353/photos/2/201040/4194898/DSC08808-vi.jpg">
<img src="http://images19.fotki.com/v32/photos/2/201040/4194898/DSC08884-vi.jpg">
<img src="http://images9.fotki.com/v172/photos/2/201040/4194898/DSC08885-vi.jpg">
<img src="http://images14.fotki.com/v247/photos/2/201040/4194898/DSC08886-vi.jpg">
LI-S4 dremeled the opening for me. He did a great job on it. I fitted it so that it is slightly behind the filler panel.

<b>Clear Corners w/Silver Visions (oven method):</b>
I just put them in the oven pre-heated to 170 for 3 minutes. They weren't even that hot when I took them out. I was able to pick them up with my hands. Then pulled them open, cuting the glue and pushing it away from the inside of the housing. The hardest part was getting the amber piece out, just be very carful and you will be fine.
<img src="http://images17.fotki.com/v28/photos/2/201040/4194894/DSC08801-vi.jpg">
<img src="http://images17.fotki.com/v28/photos/2/201040/4194894/DSC08809-vi.jpg">
<img src="http://images19.fotki.com/v353/photos/2/201040/4194894/DSC08810-vi.jpg">
<img src="http://images19.fotki.com/v353/photos/2/201040/4194894/DSC08811-vi.jpg">
<img src="http://images19.fotki.com/v36/photos/2/201040/4194894/DSC08816-vi.jpg">
<img src="http://images9.fotki.com/v176/photos/2/201040/4194894/DSC08883-vi.jpg">
<img src="http://images19.fotki.com/v353/photos/2/201040/4194894/DSC08887-vi.jpg">
<img src="http://images17.fotki.com/v28/photos/2/201040/4194894/DSC08888-vi.jpg">
<img src="http://images19.fotki.com/v353/photos/2/201040/4194894/DSC08890-vi.jpg">

This is a pic LifeinAudi took yesterday at the COI drive:
<img src="http://lifeaudi.smugmug.com/photos/106309327-L.jpg">

RSfizzy

Ooooohhh I like!!!! Well done Fluff!! :-)

Fluffhead

Thanks...where are pics of your car? Is it ready yet?

S4gasbord

Very nice! Why'd you decide to put the jammer head under the bar instead of above?

RSfizzy

I will post pics once everything has been completed. Will you send me some more details on the amber lens removal. I am really intersted in doing that. Thanks

hottuna

Man ur ride is looking sick. I love the black w the tint. Nice work on the mod.

EE:OutofBounds

your rides always look Siiiiick Kevin!! this one is no exception =)

Fluffhead

1) B/c it doesn't stand out as much, 2) B/c that's where my last one was located and it worked great

Fluffhead

I just recommend having a friend with you for support and to be the other set of hands to either spread the housings or cut the glue.

I don't know of a perfect way to get the amber out. One side came out with no drama, the other was a bitch. It seems to be held in by 3 or maybe 4 tabs. It doesn't click in or anything I think it's just wedged in. I tried knocking it out from the center like in the video that's been posted. But if I had to do it again I would tap it at the tab spots to losen it.

I wanted to take pics and/or video, but when that glue is splitting there isn't time for anything.

S4gasbord

Gotcha, thanks.