STaSIS SL owners. Post up some pic's and spec's of your ride height.
#1
Guest
Thread Starter
Join Date: Aug 2000
Location: Fayetteville, NC
Posts: 4,795
Likes: 0
Received 0 Likes
on
0 Posts
STaSIS SL owners. Post up some pic's and spec's of your ride height.
Is there a sweet spot where the front can be dropped and still maintain a camber with in required spec's?
I was looking at dropping the front about 1-1.5" and the rear .5".
I was looking at dropping the front about 1-1.5" and the rear .5".
#2
Re: STaSIS SL owners. Post up some pic's and spec's of your ride height.
I dropped mine approximately just under an inch all the way around. Naturally a little settling can occur. Current height is about 26 inches from pavement to fender peak.
I have some photos posted if you want to see how the height looks.
I have some photos posted if you want to see how the height looks.
#4
Re: Awsome ......Was camber still in spec when you had it aligned?
It was a while ago - I was one of the first SL installs in my area so I don't recall for certain. SL install was done by a local race shop, and the alignment was done by the dealer here. There were no issues.
Thread
Thread Starter
Forum
Replies
Last Post
Straniero
RS4 (B7 Platform) Discussion
3
07-11-2007 12:48 PM
S4Rules
S4 / RS4 (B5 Platform) Discussion
12
09-10-2005 03:56 AM
Argeiphontes
S4 / RS4 (B5 Platform) Discussion
23
05-22-2002 12:34 PM
shorki_07
A4 (B5 Platform) Discussion
3
05-01-2002 06:59 AM