Anyone wanting anything painted Imola, send or bring it!
#1
Anyone wanting anything painted Imola, send or bring it!
I'll do other colors, too, if you pay for the color layer of the paint.
Subject to personal scheduling, but not a long process.
Oh, BTW, you must prepare the surface by sanding until dull with 400 grit sandpaper! That's the boring part! :-)<p>Jim De Arras
<a href="http://www.imola.org">2000 00 Imola/Onyx/Alcantera S4</a>
MTM Stage III on order
MTM Suspension on order
Subject to personal scheduling, but not a long process.
Oh, BTW, you must prepare the surface by sanding until dull with 400 grit sandpaper! That's the boring part! :-)<p>Jim De Arras
<a href="http://www.imola.org">2000 00 Imola/Onyx/Alcantera S4</a>
MTM Stage III on order
MTM Suspension on order
#2
Hey Jim, How's it going with that CAN project?
I'm super interested if/when you can get it to work!!
I'd offer my assistance, but distance and the fact that my electronic skills are pretty lame prevents me from doing so.<p>-Cheng Kwan
Silver.Onyx
Stage1 mtm
Vm1 uuc
I'd offer my assistance, but distance and the fact that my electronic skills are pretty lame prevents me from doing so.<p>-Cheng Kwan
Silver.Onyx
Stage1 mtm
Vm1 uuc
#4
If you sand it, and mask it, I'll have a go at it!
But I think my skill is better on smaller items, at present!<p>Jim De Arras
<a href="http://www.imola.org">2000 00 Imola/Onyx/Alcantera S4</a>
MTM Stage III on order
MTM Suspension on order
<a href="http://www.imola.org">2000 00 Imola/Onyx/Alcantera S4</a>
MTM Stage III on order
MTM Suspension on order
#5
I too am super interested...
I can't do much about the distance (Colorado), but my electronic skills are decent, so consider my assistance offered...if you'll take us non-Imola folks <p>Richard
'00 A6 2.7TM
'00 A6 2.7TM
#7
What's Imola? Is that yellow or red? How about silver?
<p>Peter Y. Lee
Philadelphia, PA
96 M3 Lux (an S4 aficianado)
Remus exhaust, Brembo OE
slotteds, stainless steel lines,
JimC software & intake, H&R
w/ Bilstein, Hamann HM2 18"s,
S-02's, ERT underdrive pulley,
Ron Stygar SS, Racing Dynamics
su
Philadelphia, PA
96 M3 Lux (an S4 aficianado)
Remus exhaust, Brembo OE
slotteds, stainless steel lines,
JimC software & intake, H&R
w/ Bilstein, Hamann HM2 18"s,
S-02's, ERT underdrive pulley,
Ron Stygar SS, Racing Dynamics
su
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jim De Arras
S4 / RS4 (B5 Platform) Discussion
9
05-22-2000 10:32 AM
David
S4 / RS4 (B5 Platform) Discussion
6
05-18-2000 12:13 PM
Jim De Arras
S4 / RS4 (B5 Platform) Discussion
28
05-15-2000 03:00 PM
Jim De Arras
S4 / RS4 (B5 Platform) Discussion
5
05-11-2000 02:04 PM