AWE Boost Gauge question follow up..so...
03-31-2005, 01:47 PM
#1
AudiWorld Senior Member
Thread Starter
Join Date: Feb 2003
Posts: 1,738
Likes: 0
Received 0 Likes
on
0 Posts
AWE Boost Gauge question follow up..so...
it sound like my idle reading is high..around 25..so assuming this would impact the max pressure reading..i am seeing a peak of 15psi (see sig for mods) when the car is off the needle is at 10hg..all the hoses look secure so i dont think i have a leak..any ideas??<ul><li><a href="https://forums.audiworld.com/s4/msgs/1954116.phtml">original post</a></li></ul>
03-31-2005, 01:52 PM
#3
There is a little gold color filiment in the Y splitter for the FPR vac line
make sure that filiment is on the part of the Y splitter going to the boost gauge (kinda confusing, hope you understand what i'm saying)
03-31-2005, 02:00 PM
#6
Just reread your post, didn't see that when the car was off it was at 10 Hg
So what distinct is saying is correct. I don't think there is a way to "zero" it. Probably have to send the gauge back to AWE is my guess, but I could be wrong.
Thread
Thread Starter
Forum
Replies
Last Post
S40RCE:Smurf
S4 / RS4 (B5 Platform) Discussion
10
12-31-2006 07:10 AM
Scott Evil
S4 / RS4 (B5 Platform) Discussion
4
08-05-2003 02:02 PM