Can the RS4 IC's fit under the stock S4 bumper? Don't remember if anyone ever resolved this...

Didn't Kaos get his to fit under the stock bumpers without hassle?
 

I think he did have to cut some fender though.

Yup, with some cutting.

Cutting? Fender lining? Actual metal?

Actual metal.

Imaginary metal. Not actual metal. ;)

Found this pic . . . it appears cutting occurs on the sides of the front bumper
 

<center><img src="http://pictureposter.audiworld.com/1134/all_hosed_up_2.1.jpg"></center><p>

I think the bumper remains untouched...
 

I recall him having pictures of the amount of metal he had to remove from the fender in his hand. It wasn't much. Maybe 1-2" or so.

Cutting is done on the inside part... not the outside bumper part...

No, Really??? ;-P

don't forget the heating and hammering
 

Staley has done it, Josh D owns the step by step he bought from Kaos. Staley is flying in to LA to do some stuff for me including two sets of ICs, I'll document it then.

I believe Don Istook said they fit.

I meant the cutting is on the chassis of the car .. not the bumper at all...
 

errr... I guess my brain isn't working well yet. hahahahaa

Here are some pictures I found....
 

<img src="http://pictureposter.audiworld.com/20831/driver_side_bolting_1ee62.jpg">
<img src="http://pictureposter.audiworld.com/20831/driver_side_metal_cutting.jpg">

Hope this helps : )