Could a sensor or the ECU cause misfires?
04-15-2005, 06:31 PM
#1
New Member
Thread Starter
Join Date: Feb 2005
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Could a sensor or the ECU cause misfires?
I noticed the signal (checked with o-scope) to the coilpack drops when a load is placed on the motor. If the ecu was defective could it not send the signal to the coilpack?
The misfire only happens in cylinder #6 and I have tried all the usual stuff, coilpack, sparkplug,maf,output amplifier,temp sensor, fuel injector/cleaner and checked the harness from the output amplifier to coilpack.
The misfire only happens in cylinder #6 and I have tried all the usual stuff, coilpack, sparkplug,maf,output amplifier,temp sensor, fuel injector/cleaner and checked the harness from the output amplifier to coilpack.
Thread
Thread Starter
Forum
Replies
Last Post
wilson94t
S4 / RS4 (B5 Platform) Discussion
1
11-17-2009 12:58 PM
dtompsett
Audi Original "S" Cars
0
08-29-2006 02:39 PM
1.8tScreemer
A4 (B5 Platform) Discussion
0
02-03-2005 12:37 AM
escargot
Audi 90 / 80 / Coupe quattro / Cabriolet
3
12-13-2002 12:52 PM
