GIAC handheld Flashloader question
#1
AudiWorld Super User
Thread Starter
Join Date: Oct 2001
Posts: 4,225
Likes: 0
Received 0 Likes
on
0 Posts
GIAC handheld Flashloader question
I have had this thing for a while, but never messed around with the MTO buttons. I was looking at the manual online and got this from it:
Pressing any of the MTO buttons, while in PUMP or RACE mode, sends a boost command to the ECU with different values.
1. MTO1 changes the boost to 150
2. MTO2 changes the boost to 210
3. MTO3 changes the boost to 255
For most ECUs, GIAC's downloadable Windows™-based Switching Software allows direct entry of boost values instead of the three toggle settings above.
My question is, what do these boost numbers mean with each of these MTO buttons? And what is the boost number set to before you press one of these 3 buttons?
Pressing any of the MTO buttons, while in PUMP or RACE mode, sends a boost command to the ECU with different values.
1. MTO1 changes the boost to 150
2. MTO2 changes the boost to 210
3. MTO3 changes the boost to 255
For most ECUs, GIAC's downloadable Windows™-based Switching Software allows direct entry of boost values instead of the three toggle settings above.
My question is, what do these boost numbers mean with each of these MTO buttons? And what is the boost number set to before you press one of these 3 buttons?
Thread
Thread Starter
Forum
Replies
Last Post
QuattroRocket
A4 (B5 Platform) Discussion
13
06-21-2002 05:17 PM