GRRR hate search!! Can someone post the links to the graphs of logging air intake, stock?
#2
Guest
Posts: n/a
you're a fricken vag com junkie now...(data blocks inside)
These are all under Engine:
To measure air intake tempurature:
Block 004
G1 = RPM
G2 = Battery Voltage (10k - 15k volts)
G3 = Coolant Tempurature (-48 to 143 Celsius)
G4 = Intake Air Tempurature (-48 to 143 Celsius)
To measure air intake correction:
Block 116
G1 = RPM
G2 = Correction Factor Fuel (%)
G3 = Correction Factor Coolant Tempurature (%)
G4 = Correction Factor Intake Air Tempurature (mbar)
To measure air mass:
Block 002
G1 = RPM
G2 = Load (15 to 175 %)
G3 = Average Injection Period (2 to 19 milliseconds)
G4 = Air Mass (3 to 225 g/s)
That should take care of air.
To measure air intake tempurature:
Block 004
G1 = RPM
G2 = Battery Voltage (10k - 15k volts)
G3 = Coolant Tempurature (-48 to 143 Celsius)
G4 = Intake Air Tempurature (-48 to 143 Celsius)
To measure air intake correction:
Block 116
G1 = RPM
G2 = Correction Factor Fuel (%)
G3 = Correction Factor Coolant Tempurature (%)
G4 = Correction Factor Intake Air Tempurature (mbar)
To measure air mass:
Block 002
G1 = RPM
G2 = Load (15 to 175 %)
G3 = Average Injection Period (2 to 19 milliseconds)
G4 = Air Mass (3 to 225 g/s)
That should take care of air.
Thread
Thread Starter
Forum
Replies
Last Post
loanshark
S4 / RS4 (B5 Platform) Discussion
1
06-04-2001 02:01 AM