Hey guys, I am usually in the C5 forum, I figure I would ask this question here too
#1
AudiWorld Member
Thread Starter
Join Date: Sep 2006
Location: Hartford, CT
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, I am usually in the C5 forum, I figure I would ask this question here too
So to my bad luck, I broke the breather hose that is connected to the valve cover on the drivers side! I did a quick STFA, got the part number and everything...but I have this question...,
if someone has replaced this spider hose, how much of a PITA is doing it?
I am debating between DIY or bring it to my indy. I figured if it is not that hard, I would do it myself, but everything looks so tight in the "spider" area that I am having seconds thoughts about it....
Oh yeah..I was doing the VC and Cam adjuster seals when I broke it
Any input??? Thanks for your input!
if someone has replaced this spider hose, how much of a PITA is doing it?
I am debating between DIY or bring it to my indy. I figured if it is not that hard, I would do it myself, but everything looks so tight in the "spider" area that I am having seconds thoughts about it....
Oh yeah..I was doing the VC and Cam adjuster seals when I broke it
Any input??? Thanks for your input!
#2
*****--did the same w/ Pass side. Not a bad DIY. The worst part is getting it under the manifold,
but that's really not that tough. Just take off the TBB, DVs, and plastic "bi-pipes" so you have room to reach in from the front and help guide it through.
Thread
Thread Starter
Forum
Replies
Last Post
sk88erguy
Audi 5000 / 200 / V8 Discussion
2
09-09-2004 10:14 PM
gragravar
Rocky Mountain Discussion
1
09-13-2003 05:34 AM
hey guys, stupid question what are those two blues hoses that cross over the top of the valve cover.
axisaudia4
12v V6 Discussion
3
04-10-2003 01:51 PM
hwy1 80Q
Audi 90 / 80 / Coupe quattro / Cabriolet
4
03-13-2003 10:00 PM
shorki
A4 (B5 Platform) Discussion
20
10-12-2000 01:54 PM