I think the after-run coolant pump is bad....
Trending Topics
#9
New pump is about $100 at any of the on-line vendors.
I also replaced the inlet and outlet hose off of it at the same time, since they were less than 10 bucks each. Don't forget new intake manifold gaskets, but those are also less than 10 bucks. Its kind of a bitch to get the intake moved, since there are 16 bolts, some of which are more difficult to get to than others. To DIY, I'd say it would cost roughly $130 for parts, and about 3-4 hours of careful work if you haven't taken the intake off before. If you have, and know what to expect, and know where everything goes, 1-2 hours.
I have no idea what the shop would charge for labor-hours. But my parts quote is a fact.
I have no idea what the shop would charge for labor-hours. But my parts quote is a fact.
Thread
Thread Starter
Forum
Replies
Last Post
Clack
S4 / RS4 (B5 Platform) Discussion
14
11-02-2009 06:15 AM
wisconsin_quat
S4 / RS4 (B5 Platform) Discussion
4
10-31-2007 07:08 PM
BiturboBoy_V2.0_S3--
S4 / RS4 (B5 Platform) Discussion
16
10-06-2005 02:11 PM