Intrax/Koni + Oettinger REs
#1
AudiWorld Member
Thread Starter
Intrax/Koni + Oettinger REs
Well, some of you may know of the problem I've had with the Intrax/Koni Motorola Cup kit from SPP. The front was abnormally high. I was able to take the car to Intrax where Eric (from SPP) replaced the front springs with another set. These front springs are actually ~1/8" lower in the front than the springs being shipped out now (they're from before the revision). Well, all I can say now is that the drop is perfect! I am a happy camper. ;-) I also had my new 18x8" Oettinger REs installed at the same time.
I want to thank Eric for the fantastic customer support!.. For staying late to make sure everything was right this time. Also, thanks to Damon for having these springs in his garage. =P
On to the pictures (both are with the Intrax/Koni MC kit installed)...
<img src="http://pictureposter.audiworld.com/9749/s4before.jpg">
<img src="http://pictureposter.audiworld.com/9749/s4after.jpg">
-Mike-
I want to thank Eric for the fantastic customer support!.. For staying late to make sure everything was right this time. Also, thanks to Damon for having these springs in his garage. =P
On to the pictures (both are with the Intrax/Koni MC kit installed)...
<img src="http://pictureposter.audiworld.com/9749/s4before.jpg">
<img src="http://pictureposter.audiworld.com/9749/s4after.jpg">
-Mike-
Thread
Thread Starter
Forum
Replies
Last Post
RXBG
S4 (B6 & B7 Platforms) Discussion
1
08-31-2006 09:36 PM
Meskeetdog
A4 (B6 Platform) Discussion
7
05-29-2003 09:58 PM
wutang
A4 (B6 Platform) Discussion
3
05-09-2003 10:35 AM
GURTH
A4 (B5 Platform) Discussion
2
03-01-2002 10:16 AM