T60West

So, I get the Milltek exhaust. Many people suggest getting aftermarket clamps for it. So, I found these. The thing is, they are almost 3 inches wide(as opposed to a little over 1 inch for the clamps that come with it). It makes me wonder what the negative would be if I used them.
Do I use them, or not?

<img src="http://pictureposter.audiworld.com/9929/ssclamps1.jpg">

<img src="http://pictureposter.audiworld.com/9929/ssclamps2.jpg">

Mike@VAST

clamping area...I don't like those clamps you got. The Borla 1" ones are good.

JTravinski

i have one of those on my exhaust and one smaller clamp. the smaller one leaks a little.

T60West

be better also.

Mike@VAST

pressure = force/area...what camera are you using? I need to buy one: used or new.

T60West

I only bought the 2.5 and 3 inch versions. The 2.25 double band clamp, I was going to leave as is.

T60West

any pocket.

T60West

<center><img src="http://pictureposter.audiworld.com/9929/ssclamps3.jpg"></center><p>This is the stock 3" verses the SS 2.5", but you get the point.

Mike@VAST

cool, thanks, I think they came out with the 110's now...maybe even better.

Mike@VAST

stock size