eigenvector

This is the last thing i did on spring break I swear.

I noticed I still have an oil leak. I replaced the drivers side valve cover gasket and the cam seal and the passengers side cam seal.

I cant seem to find the leak its under all of my engine close to timing belt and all the wayy back.
I know its not the upper or lower oil pan and RMS. the drivers side cam plug looks fine.

Idk what else to replace, Im out of Ideas.

<a href="http://photobucket.com" target="_blank"><img src="http://i90.photobucket.com/albums/k251/s4motion/sp5.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
<a href="http://photobucket.com" target="_blank"><img src="http://i90.photobucket.com/albums/k251/s4motion/sp4.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
<a href="http://photobucket.com" target="_blank"><img src="http://i90.photobucket.com/albums/k251/s4motion/sp3.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
<a href="http://photobucket.com" target="_blank"><img src="http://i90.photobucket.com/albums/k251/s4motion/sp10.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
<img src="http://pictureposter.audiworld.com/103335/oilleak1.jpg">
<img src="http://pictureposter.audiworld.com/103335/oilleak.jpg">








Also when I was replacing my drivers side valve cover gasket I noticed scratches on those parts (pic) it didnt look normal to me, Is this bad?

TIA

<a href="http://photobucket.com" target="_blank"><img src="http://i90.photobucket.com/albums/k251/s4motion/sp8.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
<a href="http://photobucket.com" target="_blank"><img src="http://i90.photobucket.com/albums/k251/s4motion/sp9.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>

visintainer [vis]

what about the rear main seal?

B5QShip | CFDQ

It's possible you have multiple leaks. You have oil at the RMS and at the oil pan. Can you see oil coming from higher up on the engine?

eigenvector

and under the heads and all over..

PSUEng

Mine is leaking slightly....so when Tbelt job comes in about 10k, all seals are getting replaced.

eigenvector

i'l check that out thx