Ok, what variation would guys like to see dyno'd (dumps/93oct/race)...
#1
AudiWorld Expert
Thread Starter
Ok, what variation would guys like to see dyno'd (dumps/93oct/race)...
At the dyno day on 9/25 (in CT, see link below), I am going to dyno some variations of with and without Aquamist and with and without Dump pipes (exhaust cut-outs).
I had planned to do:
- 93oct with and without Aquamist (both with dumps closed)
- 93oct with Dumps open and closed (both with Aquamist on)
I already have the Aquamist variations covered, but I am curious about the Dumps...
Do you think I should do dumps open and closed with 93oct, or with Race gas?
Here are the two options:
A.)
1.)93oct, AM on, Dumps closed
*then open dumps*
2.)93oct, AM on, Dumps open
*then change gas to 104oct*
3.)104oct, AM on, Dumps open
The above shows the difference due to dumps on 93oct. Then on 104oct, I don't concern myself with differences in variables, I just go for max power, ie no changes.
B.)
1.)93oct, AM on, Dumps closed
*then change gas to 104oct*
2.)104oct, AM on, Dumps closed
*then open dumps*
3.)104oct, AM on, Dumps open
The above shows 93oct -vs- 104oct (both with dumps closed) and then shows the difference due to dumps on 104oct.
So which would you rather see the results from:
A.)
- Dumps open -vs- closed (on 93oct)
- 93oct vs 104oct (with dumps open)
B.)
- 93oct vs 104oct (with dumps closed)
- Dumps open -vs- closed (on 104oct)
I've already dyno'd the diff between 93 and 104, so that is of less interest to me. Thus it comes down to whether I want to see the differece due to the dumps while on 93oct, or see it while on 104oct?
What are your thoughts?
<img src="http://ctny.audiworld.com/mark/s4/downpipes/dumps/dsc06148.jpg"><ul><li><a href="http://ctny.audiworld.com/mark/s4/downpipes/dumps/">http://ctny.audiworld.com/mark/s4/downpipes/dumps/</a</li></ul>
I had planned to do:
- 93oct with and without Aquamist (both with dumps closed)
- 93oct with Dumps open and closed (both with Aquamist on)
I already have the Aquamist variations covered, but I am curious about the Dumps...
Do you think I should do dumps open and closed with 93oct, or with Race gas?
Here are the two options:
A.)
1.)93oct, AM on, Dumps closed
*then open dumps*
2.)93oct, AM on, Dumps open
*then change gas to 104oct*
3.)104oct, AM on, Dumps open
The above shows the difference due to dumps on 93oct. Then on 104oct, I don't concern myself with differences in variables, I just go for max power, ie no changes.
B.)
1.)93oct, AM on, Dumps closed
*then change gas to 104oct*
2.)104oct, AM on, Dumps closed
*then open dumps*
3.)104oct, AM on, Dumps open
The above shows 93oct -vs- 104oct (both with dumps closed) and then shows the difference due to dumps on 104oct.
So which would you rather see the results from:
A.)
- Dumps open -vs- closed (on 93oct)
- 93oct vs 104oct (with dumps open)
B.)
- 93oct vs 104oct (with dumps closed)
- Dumps open -vs- closed (on 104oct)
I've already dyno'd the diff between 93 and 104, so that is of less interest to me. Thus it comes down to whether I want to see the differece due to the dumps while on 93oct, or see it while on 104oct?
What are your thoughts?
<img src="http://ctny.audiworld.com/mark/s4/downpipes/dumps/dsc06148.jpg"><ul><li><a href="http://ctny.audiworld.com/mark/s4/downpipes/dumps/">http://ctny.audiworld.com/mark/s4/downpipes/dumps/</a</li></ul>
Trending Topics
#10
AudiWorld Expert
Thread Starter
Here you go.........
<ul><li><a href="https://forums.audiworld.com/events/msgs/6443.phtml">https://forums.audiworld.com/events/msgs/6443.phtml</a</li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
Mark P
S4 / RS4 (B5 Platform) Discussion
22
09-08-2004 07:18 PM
Blitzkrieg
S4 / RS4 (B5 Platform) Discussion
27
07-15-2003 12:23 PM
1FASTT
Southeast Discussion
0
12-10-2002 07:15 AM