Problem getting DTC from MAF
#1
AudiWorld Super User
Thread Starter
Join Date: Jun 2003
Posts: 4,644
Likes: 0
Received 0 Likes
on
0 Posts
Problem getting DTC from MAF
I disconnected the MAF sensor wire, started the car but no DTC. I even tried driving a few miles but still no DTC. I then shut off the car and reconnected to no avail. Anyone have any hints as to how I can get a DTC by removing the MAF sensor wire (on top of MAF housing)? Thanks!
#5
AudiWorld Super User
Thread Starter
Join Date: Jun 2003
Posts: 4,644
Likes: 0
Received 0 Likes
on
0 Posts
No offense taken, here's a pic of the wire I disconnected
<center><img src="http://members.***.net/dyos4/MAF.jpg"></center><p>I was told that this was the MAF sensor wire. Is this not correct?
Trending Topics
#8
AudiWorld Super User
Thread Starter
Join Date: Jun 2003
Posts: 4,644
Likes: 0
Received 0 Likes
on
0 Posts
I should see the check engine light on or something when the car is running correct?
No lights. I don't have a VAG. MAF has been working fine, but I've got 68K miles. Trying to sneak in that 70,000 replacement from Audi.