Those with M Box AWE K04 kit, what are your MAF readings? TIA!
#3
Step by step directions inside....
1.) Open VAG-Com
2.) Click "select" under "Select Control Modules"
3.) Click "01-Engine"
4.) Click "Meas. Block-08"
5.) Type in "003" where it says "group" and press enter
6.)Press "log"
7.)Press "start" when you are ready to go
2.) Click "select" under "Select Control Modules"
3.) Click "01-Engine"
4.) Click "Meas. Block-08"
5.) Type in "003" where it says "group" and press enter
6.)Press "log"
7.)Press "start" when you are ready to go
#4
8.) Find an empty stretch of road/highway...
9.) cruise at 45-50 mph in 3rd gear.
10.) Press accelerator pedal to the floor and do not release until 6800-7000 RPMs.
11.) Coast down to a reasonable speed and click 'Stop' and then 'Done, Close'
12.) Graph the resulting 'LOG-01-003-xxx-xxx.csv' file in Excel.
13.) Post graph on Audiworld.
-Dave Pramanik
10.) Press accelerator pedal to the floor and do not release until 6800-7000 RPMs.
11.) Coast down to a reasonable speed and click 'Stop' and then 'Done, Close'
12.) Graph the resulting 'LOG-01-003-xxx-xxx.csv' file in Excel.
13.) Post graph on Audiworld.
-Dave Pramanik