Roughedgez

<img src="http://pictureposter.audiworld.com/44542/zex.jpg">

along with the n20 kit, purge kit, bottle heater and pressure guage.
Hopefully i will be able to get some good numbers from this setup. I guess i am the guinea pig for the nitrous install.

Nick Gustas

You should get in touch with darren or piggie.

Roughedgez

does anyone have good or bad comments on this setup, any suggestions?

RocketBoy

You're going to lose most of the cooling benefit of nitrous by injecting before the turbos.

Cup-a-Chow

Zex is pretty much crap. There are other manufacturers with way better hardware. I like NOS bottles and NX solenoids and fittings. TNT makes a good all around kit.<ul><li><a href="https://forums.audiworld.com/s4/msgs/1339003.phtml">https://forums.audiworld.com/s4/msgs/1339003.phtml</a</li></ul>

Roughedgez

i was going to shoot it into the bottom of the intake mainfold

Nick Gustas

Nozzles can be mounted on the pressure side of the bypass valves.

Roughedgez

thanks for the info, good write up...

BluLytNin

beside the fact that it has to travel a hell of a
distance before it reaches the throttle body.

Prodigy

you'd want to spray pre throttle body to get proper nitrous distribution. not sure what you mean by the bottom of the intake manifold.