Mark P

I guess an RS4 bumper is the obvious choice (silver lining?) here. I'd imagine Rojo is still *the* place to go in the Northeast to get such work done? I guess I'll try contacting Jimmy to see what he has to say. My concern is that with a lighter color, the bulges from molding the RS4 bumper to an S4 stand/stick out below and are not attractive. Also, I'd want to get clear-bra again, and wonder if places have the template for the B5RS4 bumper.

Anyway, here's the result of my encounter with a turkey yesterday. At least it wasn't an Easter Bunny.

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04794.jpg">

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04795.jpg">

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04796.jpg">

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04797.jpg">

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04798.jpg">

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04799.jpg">

driver's side hood/fender seam width for reference:
<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04800.jpg">

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04801.jpg">

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04802.jpg">

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04803.jpg">

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04804.jpg">

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04805.jpg">

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04806.jpg">

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04807.jpg">

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04808.jpg">

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04809.jpg">

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04810.jpg">

<img src="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/files/images/DSC04811.jpg"><ul><li><a href="http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/">http://ctny.audiworld.com/mark/s4/maintenance/bumper_turkey/</a</li></ul>

BLK01S4

done at a $$$ shop .. Did a beautiful job, however cost me an arm + leg .. Custom Clearbra on that bumper ran me 500 beans.

LI-S4

His was one of the few installs that had no bulge under the IC's.

And, I am sure whomever he used is closer to you than RoJo...

Mark P

<img src="http://ctny-audi.com/events/060211xxtuning/images/DSC03229.jpg">

BLK01S4

doens't look that bad IMHO

LI-S4

maybe you have an earlier pic??

daseighty

but, I think making a V cut on the under side of the bumper when molding the edges would eliminate the sag.

Nogaro Stg3

short, self-tapping screws did the job perfect.

Island Boy::Jeproks

Rojo did the work.

BASELINE

Still sucks it happend to you of all people...sorry man.