When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Retrofitting Revised rear valence assembly to a non 2019 model
So I was thinking how hard it would be to swap the new rear valence over to the non 2019+ B9s. Parts are not that badly priced- would there be any interest? I was thinking of offering a retrofit kit if anyones interested. I was thinking about doing it to my pending Allroad to be delivered for a gloss black one with the hexagonal tips.
I tried to find a price for these parts but it is too early for the 2019 parts catalog to be up at the OEM sites I typically use. For reference the valance for the 2018 model is about $320 ($420 list) without any clips or screws. I would imagine the 2019 parts will be similar but I suspect that the two chrome trapezoidal pieces will be separate and will probably add another $50-$100. So figure around $500 for this cosmetic upgrade. To me this seems like a lot of cash for an upgrade that only someone familiar with Audis would notice.
I tried to find a price for these parts but it is too early for the 2019 parts catalog to be up at the OEM sites I typically use. For reference the valance for the 2018 model is about $320 ($420 list) without any clips or screws. I would imagine the 2019 parts will be similar but I suspect that the two chrome trapezoidal pieces will be separate and will probably add another $50-$100. So figure around $500 for this cosmetic upgrade. To me this seems like a lot of cash for an upgrade that only someone familiar with Audis would notice.
I have ETKA. I have all the prices for everything. The valence is definitely not that much haha.
12-21-2018, 01:08 PM
Retrofitting Revised rear valence assembly to a non 2019 model
