Anyone with a roadster wanna take a close-up pic of strut bar (where it bolts to firewall)...
#1
AudiWorld Super User
Thread Starter
Anyone with a roadster wanna take a close-up pic of strut bar (where it bolts to firewall)...
and measure the diameter of it for me? I want to do a 225 strut bar on mine if it bolts up to the same place AND is of a larger diameter.
If you dont have a pic I could still use the diameter measurement interimly.
Thanks
If you dont have a pic I could still use the diameter measurement interimly.
Thanks
#2
I'll try it later today. Pics and a measurement
<p><A HREF="mailto:jbipes@mtn.org"><img SRC="http://pictureposter.audiworld.com/AudiWorldPics/2000/bipecott.gif" BORDER=0 alt="Jeff Bipes"></a>
#4
Mance the bars are the SAME size. We checked this during the weigh-in a few weeks ago.
Doesn't your Fwd TT have this bar? It connects to two different spots on the firewall. The bar is about 1"+/- thick.
#6
AudiWorld Super User
Join Date: Mar 2000
Location: Baltimore, MD
Posts: 2,171
Likes: 0
Received 0 Likes
on
0 Posts
Also, how many bolts hold yours in place? Michael mentioned eight
on the 225 TTQC in his post on the diverter valve installation somwhere below, but I counted only six on my 180 TTQC.<ul><li><a href="https://www.audiworld.com/forum/m.new/tt/msgs/93539.phtml">Michael's post</a></li></ul>
Trending Topics
#9
It varies between 27.58 to 28.44 mm - pics to follow
<p><A HREF="mailto:jbipes@mtn.org"><img SRC="http://pictureposter.audiworld.com/AudiWorldPics/2000/bipecott.gif" BORDER=0 alt="Jeff Bipes"></a>
#10
close-up pic of strut bar (where it bolts to firewall)...little outta focus
<center><img src="http://pictureposter.audiworld.com/AudiWorldPics/2000/ttbar1.jpg"></center><p><p><A HREF="mailto:jbipes@mtn.org"><img SRC="http://pictureposter.audiworld.com/AudiWorldPics/2000/bipecott.gif" BORDER=0 alt="Jeff Bipes"></a>