Audi TT MK1 Breather PCV testing
02-20-2019, 06:32 AM
#1
AudiWorld Newcomer
Thread Starter
Join Date: Feb 2019
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Audi TT MK1 Breather PCV testing
Hi
Can anyone help , I have a 2001 TT 225 hp BAM engine, I thought the Breather PCV 06A 129 101 (which goes to the turbo Pipe inlet). was faulty as I could blow in both directions, but when I received a new PCV It also allowed to be blowed in both directions.
i did notice if I sucked from the bottom with a small restriction to the inlet side it does close.
Is this correct? ,,
Thanks in advance if anyone can confirm.
Can anyone help , I have a 2001 TT 225 hp BAM engine, I thought the Breather PCV 06A 129 101 (which goes to the turbo Pipe inlet). was faulty as I could blow in both directions, but when I received a new PCV It also allowed to be blowed in both directions.
i did notice if I sucked from the bottom with a small restriction to the inlet side it does close.
Is this correct? ,,
Thanks in advance if anyone can confirm.
Thread
Thread Starter
Forum
Replies
Last Post
baubau2.7
A6 / S6 (C5 Platform) Discussion
2
11-25-2009 05:00 AM
Bout to pull the head, just found a demolished L shape PCV hose from the block to the metal pcv line
Rosati (Ginzo)
A4 (B5 Platform) Discussion
8
09-19-2006 12:20 PM
spider418
S4 / RS4 (B5 Platform) Discussion
15
11-09-2002 08:14 PM