Got a new badge for my Gauge Pak...
#1
Got a new badge for my Gauge Pak...
Order this little guy from TTstuff. It is the little badge that sits on the bottom of the steerting wheel. It has two attachment nipples at the back so they had to be trimmed off before sticking it to the gauge pak. I also used some very fine sand paper (2000) to gentlely polish the guage pak then finish it off with some wax before putting on the badge.
<img src="http://pictureposter.audiworld.com/1312/cimg0024.jpg">
<img src="http://pictureposter.audiworld.com/1312/cimg0029.jpg">
<img src="http://pictureposter.audiworld.com/1312/cimg0031.jpg">
It came out better than I expected! Now the guage pak seems to be coming from OEM Audi!
<img src="http://pictureposter.audiworld.com/1312/cimg0024.jpg">
<img src="http://pictureposter.audiworld.com/1312/cimg0029.jpg">
<img src="http://pictureposter.audiworld.com/1312/cimg0031.jpg">
It came out better than I expected! Now the guage pak seems to be coming from OEM Audi!
Trending Topics
#8
TTstuff! See link...
<ul><li><a href="http://www.ttstuff.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=OEMBDGAS" >http://www.ttstuff.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=OEMBDGAS</a</li></ul>
#10
Nice! More info...
I started off using regular 3M double sided tape but it turns out to be way to thick. So I just used 3 layers Scotch double sided tape, and suprisingly its holding on well...at least for the last 12 hours :<P
If it falls off I might consider proxy or super glue etc etc...
Please share some pics once your stick that baby on ok? ;<
Kev
If it falls off I might consider proxy or super glue etc etc...
Please share some pics once your stick that baby on ok? ;<
Kev