Rear Haldex/differential unit install. . .
02-18-2009, 12:55 PM
#1
Audiworld Junior Member
Thread Starter
Join Date: Dec 2008
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Rear Haldex/differential unit install. . .
The rear final drive unit in my TTQ is shot (clutch slipping) and I've got a used replacement - does anyone have any tips on a re&re for it? Any other special tools besides the 12-point internal drives? It looks fairly straight forward, but I can't find a lick of info. on it in the Bentley. Unfortunately, I'll be doing in on jack-stands in my garage.
Also, is MT90 okay for the rear diff.?
Also, is MT90 okay for the rear diff.?
02-18-2009, 03:56 PM
#3
AudiWorld Senior Member
Join Date: Sep 2004
Location: Round Rock TX
Posts: 1,614
Likes: 0
Received 0 Likes
on
0 Posts
I swapped the guts on mine when I did my LSD; however, sounds like you'll be doing more
I've got some pics on my fotki, and I did a rough write up on this site, but again this was just the diff guts.
02-18-2009, 03:57 PM
#4
Member
Join Date: Dec 2002
Posts: 2,761
Likes: 0
Received 0 Likes
on
0 Posts
I don't know if you've already seen this, but it may be of some use...
Haldex info<ul><li><a href="http://qbn.rdefined.com/HALDEX.pdf#search='haldex'">http://qbn.rdefined.com/HALDEX.pdf#search='haldex'</a</li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
RxFX101
Audi 90 / 80 / Coupe quattro / Cabriolet
3
07-30-2004 03:46 AM
Skibum the Original
A4 (B6 Platform) Discussion
2
02-28-2003 03:30 PM
IHAD2Turbos
S4 / RS4 (B5 Platform) Discussion
5
02-18-2003 05:08 PM