:PROJECT::dumpTT:

will BBS LM's not fit over the ECS porche stage 3 "big reds" kit. Or better yet, can you get thses with a stagered set up

TT_Nuge

But there is a rumor those were a European set with different offsets than what's available in the US. I believe Steve has a picture of these on a car in the Modshack. But Bill (KodeTT) just tried and had to switch brakes and others have found the same thing.
So I don't think any of the standard US Available offset LM's will fit. Oh, there was also talk of a Porsche fitment working with adapters but I don't believe that was a TT now that I think about it.

Trent

iborroel

We have ours off the car and are looking to sell them. If you are interested you could test fit them. Let me know.

Ignacio

:PROJECT::dumpTT:

im prety sure they wont fit, but if you wana try, let me know, just need to try one wheel

QS -

dont quote me on this, but I believe that Marcus - Quicksilva had those wheels on the porsche reds

nikhil

yes he did(does), however his were imported from the U.K. IIRC....

meem

those were also 18" lm's -- different offsets.

kodeTT

<center><img src="http://pictureposter.audiworld.com/23258/lmclose.jpg"></center><p>i can fit the wheels on my car. even then, i needed 3mm spacers to clear the wilwoods (1/2 thinner on each side of the caliper = 1" total).

the pic above is with 5mm spacers...i took the center torx out on the inside of the fender...did a little roll up on the lip, but the 5mm spacer still rubbed the tire. which is why i went down to a 3mm spacer...no probs with that.

joe@vwvortex

<center><img src="http://evil6.com/pix/misc/P1010100_800.jpg"></center><p>
local tuning shop for me. I'll be there this friday. I'm gonna get more info. Apparently - they are Porsche fitment with adaptors. If they clear stoptechs they'll clear pretty much anything.

TTschwing

A pair of "Big Yellows:....:-)

<img src="http://images2.fotki.com/v20/photos/7/7305/220723/DSCF0009-vi.jpg">