VAG-COM request - let's compare notes!
Thread Starter
AudiWorld Senior Member
Joined: Jun 2003
Posts: 1,058
Likes: 0
VAG-COM request - let's compare notes!
I'm still trying to chase this door-locking problem I've had for a while now, and my 3.2TT is going back to the dealer's next week for more troubleshooting.
Can anyone with a VAG-COM please connect to module 35 (Central Lock/Alarm) and check their WSC aka Work Shop Code, as follows:
<img src="http://hitechgti.50megs.com/audi/wscode.jpg">
I've changed the actual software coding, but not the WSC, and I want to make sure it's back to "stock" before handing the car over to the dealership.
Thanks!
-Marc
Can anyone with a VAG-COM please connect to module 35 (Central Lock/Alarm) and check their WSC aka Work Shop Code, as follows:
<img src="http://hitechgti.50megs.com/audi/wscode.jpg">
I've changed the actual software coding, but not the WSC, and I want to make sure it's back to "stock" before handing the car over to the dealership.
Thanks!
-Marc
Thread Starter
AudiWorld Senior Member
Joined: Jun 2003
Posts: 1,058
Likes: 0
Thanks Steve!! I was a little worried about it because...
..from my scans dating 5/20 and 5/26, the WSC code was 01236, whereas in all my other scans from 7/1 onwards, the code changed to 26107 (as shown above).
Of course, the dealer changed the control module sometime between these dates, in an effort to fix the problem..
Could that explain the difference in codes?
Does every control module have its own WSC?
Thanks again!
-Marc
Of course, the dealer changed the control module sometime between these dates, in an effort to fix the problem..
Could that explain the difference in codes?
Does every control module have its own WSC?
Thanks again!
-Marc
Thread
Thread Starter
Forum
Replies
Last Post
allroad55
Audi allroad
6
Nov 3, 2010 12:46 AM
mksap11
VAG-COM Discussion
2
Dec 17, 2006 02:28 AM
JimOB
A6 / S6 (C5 Platform) Discussion
2
Nov 6, 2000 09:16 AM
