TPMS Testing
Banned
Joined: Sep 2000
Posts: 2,230
Likes: 2
OK, try this:
Select -> Chassis Tab -> 65-Tire Pressure -> Measuring Blocks. Scroll through the Groupe and see what there is to see.
If you post the VAG Number displayed when you first access the TPMS module, we *may* be able to give you more specific info.
-Uwe-
If you post the VAG Number displayed when you first access the TPMS module, we *may* be able to give you more specific info.
-Uwe-
Thread Starter
AudiWorld Member
Joined: Nov 2006
Posts: 206
Likes: 1
Thanks! I'll post what I find. BTW:
I found out I was getting the TPMS trouble light due to the fact I had enabled the remote clock and temp settings in my last foray into instrument lighting settings.
Set them both back to 0, trouble light went out.
I still have been unable to set the dials and scales to be on all the time. I set the first digit to 3 but the scales only come on at key turn and then back off until I put lights on.
Does anyone know what the "(2nd map)" prompt refers to in the vag-com help window?
Thanks!!
Set them both back to 0, trouble light went out.
I still have been unable to set the dials and scales to be on all the time. I set the first digit to 3 but the scales only come on at key turn and then back off until I put lights on.
Does anyone know what the "(2nd map)" prompt refers to in the vag-com help window?
Thanks!!
Thread
Thread Starter
Forum
Replies
Last Post
sizzle
Audi A5 / S5 / RS5 Coupe & Cabrio (B8)
27
Feb 14, 2009 08:29 AM
mbox
S4 / RS4 (B5 Platform) Discussion
9
May 17, 2005 05:32 PM
