Wheel Locks?
06-03-2002, 10:25 AM
#1
Audiworld Sponsor
Thread Starter
Join Date: Jun 2000
Posts: 19,700
Likes: 0
Received 0 Likes
on
0 Posts
Wheel Locks?
I'm looking for a set of wheel locks for my new BBS CHs. From measuring the supplied bolts, it looks like I need a 14mmx1.5 bolt with a shank length of 28-30mm. I'd prefer a set like these:
<img src="http://pictureposter.audiworld.com/6924/lock1.jpg">
over these:
<img src="http://pictureposter.audiworld.com/6924/lockboltcone.jpg">
if possible (but I think 1.25" would be too long and the 1.1" ones only come in 12mm).
Can anyone point me in the right direction?
Thanks.
Dave Pramanik
<img src="http://pictureposter.audiworld.com/6924/lock1.jpg">
over these:
<img src="http://pictureposter.audiworld.com/6924/lockboltcone.jpg">
if possible (but I think 1.25" would be too long and the 1.1" ones only come in 12mm).
Can anyone point me in the right direction?
Thanks.
Dave Pramanik
06-03-2002, 10:40 AM
#3
Audiworld Sponsor
Thread Starter
Join Date: Jun 2000
Posts: 19,700
Likes: 0
Received 0 Likes
on
0 Posts
I did contact Prestige Wheels...
who (according to messages here) is a US reseller for RAD, and the best they could do was a lock with a 32mm shank, which I believe would be too long.
-Dave Pramanik
-Dave Pramanik
06-04-2002, 12:31 PM
#6
AudiWorld Super User
Join Date: May 2000
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, I didn't look closely enough at your photos. The top set are in fact Gorillas, and I have
them. I use them on my BBS wheels and McGuards on my Avus. Like the Gorilla better.
06-05-2002, 05:15 AM
#7
Audiworld Sponsor
Thread Starter
Join Date: Jun 2000
Posts: 19,700
Likes: 0
Received 0 Likes
on
0 Posts
I didn't see a size listed that matched the supplied bolts for the BBS wheels.
Anyway, I went ahead and ordered a set of RAD wheel locks from Sander Performance. They should be here today.
-Dave Pramanik
-Dave Pramanik
Trending Topics
07-02-2002, 08:39 AM
#8
New Member
Join Date: Jul 2002
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Re: I did contact Prestige Wheels...
We can order the right shank length for you. You need to measure the length of your lug bolts (shank length) from the bottom of the cone to the tip of the bolt. Then call us (Prestige Wheel Acc.) @ 80-854-6770 to order. It takes about three weeks to get them, at a cost of approx $39.00 plus shipping.
Thread
Thread Starter
Forum
Replies
Last Post
Ben3.2TT@BC
TT (Mk1) Discussion
3
07-10-2005 09:46 AM